Doctor of Engineering, Tokyo Institute of Technology

Master of Engineering, Hiroshima University

知能情報学

社会システム工学

経営学

生産工学一般

経営工学

Intelligent Informatic

Social System Engineering

Business Administration

Production engineering in general

Management engineering

Humanities & social sciences, Business administration

Social infrastructure (civil Engineering, architecture, disaster prevention), Safety engineering

Social infrastructure (civil Engineering, architecture, disaster prevention), Social systems engineering

Informatics, Intelligent informatics

Oct. 2016
Kanagawa University, Research Institute for Engineering, Visiting professor

Apr. 2011 - Mar. 2016
Kanagawa University, Faculty of Engineering, Professor

1997 - 2015
Hiroshima University, Graduate Cource, 非常勤講師

1997 - 2015
- Hiroshima University Temporary Lecturer

Jun. 1994 - Mar. 2011
- The University of Electro-Communications Professor

2009 - 2010
The University of Electro-Communications, Faculty of Electro-Communications, Department of Systems Engineering

2000 - 2010
Aoyama Gakuin University, Research Institute, Visiting researcher

2006 - 2007
The University of Electro-Communications, Graduate School of Electro-Communications, Graduate School of Electro-Communications

2005 - 2005
Tokyo Metropolitan University

2005 - 2005
Tokyo Metropolitan University Temporary Lecturer

2002 - 2003
The University of Electro-Communications, Faculty of Electro-Communications, Department of Systems Engineering

2000 - 2001
The University of Electro-Communications, Graduate School of Electro-Communications

May 1996 - Mar. 1997
UC Berkeley, Purdue University Visiting Scholar

1996 - 1997
カリフォルニア大学, パデュー大学 客員研究員

1984 - 1994
The University of Electro-Communications, Faculty of Electro-Communications

1984 - 1994
The University of Electro-Communications Associate Professor

1994
- 電気通信大学電気通信学部 教授

1983 - 1984
The University of Electro-Communications, Faculty of Electro-Communications

1983 - 1984
The University of Electro-Communications Assistant Professor

1972 - 1982
Hiroshima University, Faculty of Engineering

May 1976 - Feb. 1977
Tokyo Institute of Technology Visiting Researcher

1976 - 1977
東京工業大学 内地研究

1970 - 1972
Hiroshima University, Faculty of Engineering

1970
Hiroshima University, 工学研究科, 経営工学専攻, Japan

1970
Hiroshima University, Graduate School, Division of Engineering

1968
Hiroshima University, Faculty of Engineering, 経営工学科, Japan

1968
Hiroshima University, Faculty of Engineering

Jan. 2022 - Present
Journal of Digital Life, Editor, 産経デジタル, Others

Apr. 2010 - Present
国際・学術委員会委員, 横幹連合, Society

Apr. 2024 - Mar. 2027
co-Editor-in-Chief, SANKEI digital, Journal of Digital Life, Others

Apr. 2009 - Mar. 2011
Board member, NPO Transdisciplinary Federation of Science and Technology (TraFST), Society, Japan Industrial Management Association

Apr. 2008 - Mar. 2010
理事 学術・国際委員会副委員長 経営高度化調査委員会委員長, 横断型基幹科学技術研究団体連合, Society, 社団法人日本経営工学会

May 2007 - Apr. 2009
日本経営工学会会長, 社団法人日本経営工学会, Society, 社団法人日本経営工学会

May 2007 - Apr. 2009
President of Japan Industrial Management Association (JIMA), Japan Industrial Management Association (JIMA), Society, Japan Industrial Management Association

2008
学としての知の統合委員会、副委員長, 特定非営利活動法人 横断型基幹科学技術研究団体連合, Society, 特定非営利活動法人 横断型基幹科学技術研究団体連合

2008
学術・国際担当理事, 特定非営利活動法人 横断型基幹科学技術研究団体連合, Society, 特定非営利活動法人 横断型基幹科学技術研究団体連合

May 2003 - Apr. 2007
理事, 社団法人日本経営工学会, Society, 社団法人日本経営工学会

May 2003 - Apr. 2007
Board member, Japan Industrial Management Association (JIMA), Society, Japan Industrial Management Association

2001 - Mar. 2005
Board member (Chair of Tokyo branch), Society of Plant Engineers Japan (SOPE), Society, Japan Industrial Management Association

Apr. 2000 - Mar. 2005
理事(関東支部長), 社団法人日本設備管理学会, Society, 社団法人日本経営工学会

Jun. 2000 - May 2003
Editor of JIMA jounal, Japan Industrial Management Association (JIMA), Society, Japan Industrial Management Association

May 2000 - Apr. 2002
論文誌編集委員会委員長, 社団法人日本経営工学会, Society, 社団法人日本経営工学会

2001
理事, 日本ロジスティクスシステム学会, Society, 日本ロジスティクスシステム学会

2001
Director, The Japan Society of Logistics Systems, Society, The Japan Society of Logistics Systems

2000
評議員, 日本設備管理学会, Society, 日本設備管理学会

2000
理事（関東支部長）, 日本設備管理学会, Society, 日本設備管理学会

2000
春季大会実行委員, 日本設備管理学会, Society, 日本設備管理学会

2000
平成１３年度春季大会委員長, 日本設備管理学会, Society, 日本設備管理学会

2000
Diretor, Society of Plant Engineers Japan, Society, Society of Plant Engineers Japan

1998
理事, スケジューリング学会, Society, スケジューリング学会

1998
評議員, スケジューリング学会, Society, スケジューリング学会

1998
Director, Scheduling Society of Japan, Society, Scheduling Society of Japan

1976
上級会員, 国際経営工学技師協会, Society, 国際経営工学技師協会

1976
Senior member, Institute of Industrial Engineers, Society, Institute of Industrial Engineers

1968
支部委員会委員, 社団法人日本経営工学会, Society, 社団法人日本経営工学会

1968
日本経営工学会理事, 社団法人日本経営工学会, Society, 社団法人日本経営工学会

1968
平成１５年度春季大会組織委員長, 社団法人日本経営工学会, Society, 社団法人日本経営工学会

1968
表彰委員会委員, 社団法人日本経営工学会, Society, 社団法人日本経営工学会

1968
経営工学教育及び資格認定検討委員, 社団法人日本経営工学会, Society, 社団法人日本経営工学会

1968
評議員, 社団法人日本経営工学会, Society, 社団法人日本経営工学会

1968
論文誌編集委員会委員, 社団法人日本経営工学会, Society, 社団法人日本経営工学会

1968
Diretor, Japan Industrial Management Association, Society, Japan Industrial Management Association

Jul. 2021
Prism Center, Purdue University, USA
Exceptional Contributions to Innovations in Artifacts Science and Models
The Distinguished PRISM Center Scholar Award

Jan. 2019
Marquis Who's Who
2019 LIfetime Achivement Award, MATSUI Masayuki

Jan. 2019
Marquis Who's Who
2018 Albert Nelson Marquis Lifetime Achivement Award, MATSUI Masayuki

May 2016
Japan Industrial Management Association
Honorary member, MATSUI Masayuki

2016
International Biographical Centre
The Sir Issac Newton Legacy of Honour Award, MATSUI Masayuki

2012
Marquis Who's Who
The Sir Issac Newton Scientific Award of Excellence 2012, MATSUI Masayuki

2005
Japan Industrial Management Association
Outstanding Paper Award, Masyuki Matsui
Japan

2005
Japan Industrial Management Association
Academic Prize, Masayuki Matsui
Japan

2005
Paper Award of Japan Industrial Management Association

2005
Japan Industrial Management Association Award

A case study on power purchase and charge switching using a storage battery in Solar power generation
Taiki Kato; Hiromasa Ijuin; Tetsuo Yamada; Masato Takanokura; Masayuki Matsui
Corresponding, J. SOPE Japan, 35, 4, 114-123, Feb. 2024, Peer-reviwed
Scientific journal, Japanese

Seasonal Analysis and Capacity Planning of Solar Energy Demand-to-Supply Management: Case Study of a Logistics Distribution Center
Akihiko Takada; Hiromasa Ijuin; Masayuki Matsui; Tetsuo Yamada
Corresponding, Energies, 17, Dec. 2023, Peer-reviwed
Scientific journal, Japanese

An e-Management Method and Self-Driving Frame of on-Demand-to-Supply Robot Type using Ternary/Pair-Map
Masayuki Matsui
Lead, Journal of Digital LIfe, 3, 13, 1-7, Oct. 2023, Peer-reviwed
Scientific journal, English

A Wealth-Additive Approach to GDP versus SDG Body Using Behavioral Relax-Scheduling Policy
Masayuki Matsui
Lead, Theoretical Economics Letters, 13, 782-790, Aug. 2023, Peer-reviwed
Scientific journal, English

Proposal for an Explainable AI Matrix Method in the Knowledge Society
Nakada, T; Yamada, T; Matsui, M
Corresponding, Journal of the Society of Plant Engineers Japan, 日本設備管理学会, 35, 1, 33-39, 21 Apr. 2023, Peer-reviwed
Scientific journal, Japanese

A DX-like Ternary/Pair-Map, Its Eco-Entropy Scheme, and Managerial Diversity of Nature versus Artifacts Type on Sandwich Theory
Masayuki Matsui
Lead, Theoretical Economics Letters, 13, 109-118, Feb. 2023, Peer-reviwed, Invited
Scientific journal, English

Nature versus Artifact Body II: Sollen, Central Dualism, and Chameleon's Criteria
Masayuki Matsui
Lead, Journal of Digital LIfe, 3, 3, 1-9, 17 Jan. 2023, Peer-reviwed, Invited
Scientific journal, English

AI-digital Engine of Artificial Economic and Knowledge Type by a Matsui's Progressive Loop Approach
Masayuki Matsui
Lead, Theoretical Economics Letters, 12, 4, 1288-1296, 29 Sep. 2022, Peer-reviwed, Invited
Scientific journal, English

Virtual GDP Engine: The Loop-Conveyor Problem in Sustainable Economics, and a Method for Formalizing Carnot-Like Dynamism and Win-Win & Sharing
Masayuki Matsui
Lead, Theoretical Economics Letters, 12, 3, 761-767, May 2022, Peer-reviwed, Invited
Scientific journal, English

An Application of On-Demand Cumulative-Control Analysis to COVID-19 Patients Population
Onodera, T; Yamada, T; Matsui, M; Kobayashi, D; Kobayashi, E
Journal of the Society of Plant Engineers Japan, 33, 4, 134-142, Feb. 2022, Peer-reviwed
Scientific journal, Japanese

Nature versus Artifacts Body: One-Leaf Hyperboloid Type, Pair-Map Microcosm and Nested Economics
Masayuki Matsui
Lead, Journal of Digital Life, 17 Jan. 2022, Peer-reviwed, Invited
Scientific journal, English

Solar Energy Demand-to-Supply Management by the On-Demand Cumulative-Control Method: Case of a Childcare Facility in Tokyo
Ijyuin, H; Yamada, S; Yamada, T; Takanokura, M; Matsui, M
Last, Energies, 15, 4608-4630, 2022, Peer-reviwed
Scientific journal, English

A Chameleon's Harmonic Correlatin, Criteria and Diversity for a Win-win and Sharing World
Masayuki Matsui
Lead, Theoretical Economics Letters, 10, 4, 735-744, 03 Aug. 2020, Peer-reviwed, Invited
Scientific journal, English

A Scientific and Economic View on Collaboration, Balancing vs. Sharing
Matsui, M; Yamada, T; Takanokura, M
Theoretical Economics Letters, 9, 1, 49-59, Feb. 2019, Peer-reviwed, Invited
Scientific journal

Horizontal integration management: An optimal switching model for parallel production system with multiple periods in smart supply chain environment
Jing Sun; Hisashi Yamamoto; Masayuki Matsui
International Journal of Production Economics, 01 Jan. 2019, © 2019 Elsevier B.V. Horizontal integration via a new generation of global value chain network is a main characteristic of Industry 4.0. As a contribution to the achievement of smart supply chain, optimal operation management for horizontal integration of production network has been paid attention to recently. This paper aims to derive an optimal switch model considering production, due date and quality for parallel production system with multiple periods in smart supply environment. Due to the customer needs of cost and delivery date shorting, prompt change in the production plan became more important. In the multi period system (For instance, production line.) where target processing time exists, production, idle and delay risks occur repeatedly for multiple periods. In such situations, delay of one period may influence the delivery date of an entire process. This kind of problem is called “a limited-cycle problem with multiple periods”, and is seen in production lines, time-bucket balancing, and production seat systems and so on. In this paper, we discuss minimum expected cost including production, due date and quality in a parallel production process, where the risk depends on the previous situation and occurs repeatedly throughout multiple periods. Also, the policy of optimal switching for parallel production system will be analysed. The results of numeric experiment in this paper show that the proposed optimal switching model can contribute to the scientific knowledge on the development of integrated solutions for parallel production system.

A Theory of Modern Economic Growth toward Sharing Society
MATSUI Masayuki
Theoretical Economics Letters, 8, 675-684, Feb. 2018, Peer-reviwed, Invited
Scientific journal, English

Special workers' assignment optimization under the limited-cycled model with multiple periods
Xianda Kong; Hisashi Yamamoto; Peiya Song; Jing Sun; Masayuki Matsui
Corresponding, JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, JAPAN SOC MECHANICAL ENGINEERS, 10, 3, Jul. 2016, Peer-reviwed, Although assembly line is widely used for several decades since it appears during the Industrial Revolution, nowadays, it still has the vitality, especially in the developing countries such as China, where labor-intensive enterprise is still the mainstay industry. Assembly line has its advantages for reducing costs and production time. However, laborer is the main factor of production speed in such a labor-intensive enterprise. Because of the various working capacity of worker, one work process may delay or idle, and this will influence processes. This unforeseeable consecutive delay of process may lead to the postponing of whole manufacturing production. In order to minimize the risk, the assignment of the workers, especially untrained worker is focused on. In previous researches, rules of optimal worker assignment with two kinds of workers, which are distinguished by the capacity of processing, were proposed when minor untrained workers are less than four people. In this paper, we deal with the rules under this LCMwMP (limited-cycled model with multiple periods) model without concerning the number of minor untrained workers. Additionally, some rules of minor well-trained workers assignment optimization are researched by numerical analyses.
Scientific journal, English

Optimal Worker Allocation considering Operation Skill on Different Task in Limited-cycle Multiple periods
X. Kong; H. Yamamoto; J. Sun; M. Matsui
Innovation and Supply Chain Management, 10, 2, 61-67, 2016

Ergonomic Study of Design Coordination Method for the Intersections Community Road based on EEG-wave of Driver
A. Araki; M. Mori; N. Kubo; K. Sakae; M. Matsui; H. Nakayasu
Journal of Society of Plant Engineers Japan, 日本設備管理学会, 28, 3, 126-135, 2016
Japanese

Effects of Drivers Visual Information Process to Special Orientation Analyzed by Experiment
N. Kobayashi, M. Mori, N. Kubo, K. Sakae, M. Matsui, H. Nakayasu
Journal of Society of Plant Engineers Japan, 日本設備管理学会, 27, 4, 145-153, 2016
Japanese

Hierarchical coordinated control of a multi-procedure CSPS system by learning optimisation methods
Hao Tang; Chao Wang; Masayuki Matsui; Bing Liu
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, TAYLOR & FRANCIS LTD, 53, 7, 2055-2072, Apr. 2015, Peer-reviwed, We consider the hierarchical coordinated control of a multi-procedure conveyor-serviced production station system with flexible stations deployed between adjacent procedures, which includes a dynamic intra-procedure switching control of the flexible stations for the goal of balancing different procedures and a dynamic inter-procedure production coordination of all of the stations within each procedure. It is complicated in terms of modelling and optimisation, and thus, it is difficult to find a solution using numerical methods; as a result, we refer to model-free learning optimisation methods. First, we establish a neuro-dynamic programming algorithm by utilising cerebellar model articulation controllers (CMACs) to approximate state-action values at an upper hierarchy. Second, according to the reaction-diffusion phenomenon, we combine a Wolf-PHC algorithm with a local information-interaction scheme to learn look-ahead control policies at the lower hierarchy. Simulation results show that, compared with traditional Q-learning and the backward Q-learning based Q-learning, our proposed CMAC-based learning optimisation methods have the advantages of yielding a higher processing rate and having a faster optimisation speed with a lower storage requirement.
Scientific journal, English

A Study on Three Rookie Workers' Assignment Optimization under the Limited-Cycled Model with Multiple Periods―Law of Rookies Firstー
P. Song; X. Kong; H. Yamamoto; J. Son; M. Matsui
Innovation and Supply Chain Management, 9, 1, 51-59, 2015

Case Study on an Integrated Management Planner ALMAP between Demand-to-Supply and Assembly Line
T. Yamada, T. Ogawa, M. Matsui, H. Utsugi, H. Murata
Journal of Society of Plant Engineers Japan, 日本設備管理学会, 27, 3, 92-99, 2015
Japanese

The Invisible Body-Balancing Economics: A Midium Approach
MATSUI Masayuki
Theoretical Economics Letters, 5, 1, 66-73, 2015, Peer-reviwed, Invited
Scientific journal, English

A Study on the Target Processing Time of Worker Allocation Optimization Problem in Limited-Cycle Multiple Periods
X. Kong; J. Sun; H. Yamamoto; M. Matsui
Information, 17, 6(B), 2619-2634, Jun. 2014

Optimal Switching Policy on Limited-Cycle Problem with Multiple Periods
J. Sun; X. Kong; H. Yamamoto; M. Matsui
Journal of Society of Plant Engineers Japan, 25, 4, 1-6, Jan. 2014

Flexible Switch Strategy for the Limited-Cycle with Multiple Periods
J. Sun; X. Kong; H. Yamamoto; M. Matsui
Innovation and Supply Chain Management, 7, 4, 167-172, Dec. 2013

Factory Study Method and Empirical Analysis for Mixed Line Improvement by SALPS
T. Yamada; K. Ishizaki; M. Matsui; J. Suzuki
Journal of Society of Plant Engineers Japan, 日本設備管理学会, 25, 3, 139-146, Oct. 2013
Japanese

Optimal Worker Assignment with Two or Three Special Workers in a Reset Limited-Cycle problem Model with Multiple Periods
X. Kong, J. Sun, H. Yamamoto, M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 64, 2, 157-168, Jul. 2013, The classical assignment problem has been widely applied in span manufacturing, personnel scheduling and transportation, to name just a few areas. Generally, the problem seeks to minimize the cost of assigning a given set of jobs (tasks) to a group of machines (worker). Computationally, the assignment problem is considered "easy" because it can be solved in polynomial time using several efficient algorithms. In this paper, we use a limited-cycle model with multiple periods where the risk itself is also affected greatly by the risks which existed in the earlier periods, and we focus on the property of the optimal assignment with minimized total expected risk (cost) in the limited-cycle model. First, the reset model, a simple model of the limited-cycle model, is presented. Then, the optimal assignment problem under the reset model is defined. After that, the property of the optimal assignment with two special workers is proposed. Finally, the property is proved using a mathematical approach and investigated via numerical experiments with a program in which an algorithm based on the branch and bound method is used.
Japanese

Optimal Worker Assignment with Two Special Workers in a Limited-Cycle Model with Multiple Periods
X. Kong; J. Son; H. Yamamoto; M. Matsui
Asian J. Management Science and Applications, 1, 1, 96-120, Jun. 2013

Case Study of Generalized Material Flow Accounting in Consideration of a Rate of Utilization
Ohba, M; Matsui, M; Ishii, N; Mutaguchi, T; Yamada, T
International Journal in Business and Economics, 5, 1, 51-62, Jun. 2013, Peer-reviwed, Invited
English

An enterprise-aided theory and logic for real-time management
Masayuki Matsui
International Journal of Production Research, 51, 23-24, 7308-7312, 2013, Peer-reviwed, Invited, The traditional static/statistic management would not be necessarily useful under flexible/agile speed and changeable market in this century. There is the stochastic/intelligent enterprise problem toward real-time (RT) and big-data (BD) environment. Our problems are then sketched as follows: The needs to RT management would be more promoted and the look-ahead balancing problem with delay (lead time) would become more important to enterprises. This problem would include longer delay (gain) and feed-forward treatment as the larger ship control, and would be a newer and forthcoming subject beyond the traditional control theory on feedback focus. Thus, the problem would probably view and discuss a world of post-Cybernetics in the future. This paper presents a sandwich theory and develops a RT theory and look-ahead logic with delay for the enterprise-organisational behaviour under BD. The sandwich theory for the enterprise is first proposed, and would be occurred by the matching problem of the respective ellipse shape in the lower level and upper level. This correspondence would be considered as a dual problem in Matsuis form (W = ZL), and its solution would be Nashs point in the equilibrium at a pair a game. © 2013 Taylor &
Francis.
Scientific journal, English

Economic Station-Centered Network and Invisible Collaboration: A Cyclic vs. Semi-Cyclic View
MATSUI Masayuki
Theoretical Economics Letters, 2, 3, 343-349, Aug. 2012, Peer-reviwed
English

Supplier Risk Management: An Economic Model of P-Chart Considered Due-Date and Quality Risks
J. Sun; M. Matsui; Y. Yin
International Journal of Production Economics, 139, 58-64, Mar. 2012

Optimal Switching Frequency in Limited-Cycle with Multiple Periods
J. Sun; H. Yamamoto; M. Matsui; X. Kong
Industrial Engineering & Management Systems, 11, 1, 48-53, Mar. 2012

A Management Consideration of Inpatients Care Model in a Hospital
Kobayashi, D; MATSUI M; Honda, N
Journal of the Society of Plant Engineers Japan, 日本設備管理学会, 23, 3, 146-154, Nov. 2011, Peer-reviwed
Japanese

Analysis of effectiveness and benefits of collaboration modes with information- and knowledge-sharing
Sang Won Yoon; Masayuki Matsui; Tetsuo Yamada; Shimon Y. Nof
Corresponding, JOURNAL OF INTELLIGENT MANUFACTURING, SPRINGER, 22, 1, 101-112, Feb. 2011, Peer-reviwed, This study addresses an empirical analysis of information- and knowledge-sharing among collaborative decision makers. In this research, each decision maker represents one of three distributed centers in ERP systems: Sales, Production, and Procurement Centers. Their respective objectives and decision policies are defined to design collaborative decision-making environments. MICSS-LAN, an ERP simulation tool, was applied for the experiments, generating explicit numerical results that enable the measurement of the effectiveness and benefits by collaborative decision making. The experimental results indicate that total profit and due date performance have been improved by information- and knowledge-sharing. It implies that better design and utilization of ERP structures can be achieved by a certain level of information- and knowledge-sharing.
Scientific journal, English

A study of optimal switching problem in limited-cycle with multiple periods
Jing Sun; Hisashi Yamamoto; Masayuki Matsui
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, ZHEJIANG UNIV, 11, 2, 933-937, Dec. 2010, Peer-reviwed, Invited, In a social system or production line, the restrictions of the cost and the due-time exist in each period. Generally, whether these restrictions are satisfied is dependent not only on the risks of this period, but also on the risks generated beforehand. We consider controlling the production process by switching the processing rate to a faster one at a given period. This paper deals with the optimal switching period to minimize the total expected cost of the production process. We first propose the optimal switching period model, and then the mathematic formulation of the total expectation is presented. Finally, the policy of optimal switching period is investigated in detail by numerical experiments.
Scientific journal, English

B-3 Development of ERP Education Program for Business Process Re-engineering Project
孫 晶; 玉木 欽也; 筧 宗徳; 渡辺 一衛; 石井 信明; 松井 正之; 越島 一郎
Proceedings of International Association of P2M, International Association of P2M, 2010, 96-104, 04 Sep. 2010, In global competition, a lot of enterprises try to use the ERP package to improve achievement by business reform. However, although there are a lot of cases of achievement improvement and the customer satisfaction improvement, the failing case is not few. The failing reason is various, and one of the main causes is that ERP is not able to be used well on the production site. Therefore, the ERP education is necessary for making the ERP introduction succeed. In this background, the project of ERP education system is started by research center for e-learning professional competency of Aoyama Gakuin university research institute, which also is a joint research among NTT data systems corporation and ORACLE Japan corporation. This paper reports the result of the research.
Japanese

Models of P-Control Chart with Tardiness Penalty
Jing Sun; Masayuki Matsui
International Journal of Productivity and Quality Management, 6, 2, 137-155, Aug. 2010, Peer-reviwed, Due to today's increasing competition, a major trend is the demand of customers to manufacturers for supplying higher quality products in shorter due time. This paper proposes two models of P control chart with tardiness penalty used in short due time processes to improve the quality of manufacture. When the P control chart is used in short due time process, the penalty cost for the delay might be imposed. Therefore, clarifying and treating the assignable cause in due time with minimum cost have become a reality problem. In this paper, first, we propose two models of P control chart with tardiness penalty. Then, we explain the mathematical formulations which correspond to the two models. Finally, to clarify the management rules of process situations where the two models should be used in, we investigated the comparisons between the two models by numerical experiments in detail. Copyright © 2010 Inderscience Enterprises Ltd.
Scientific journal, English

Division of Work, Stochastic (re-)Balancing and Demand Speed: From Assembly Line toward Demand Chain
MATSUI Masayuki
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 60, 6E, 324-330, 2010, Peer-reviwed, Invited, The invisible hand in economics is generally well-known, and is hypothesized to attain a win-win situation in the division of work. Here, this invisible hand of God would be regarded as "demand speed" in Matsui(2008), and the system balancing problem using demand speed is considered stochasti-cally using a station-centered approach. This paper discusses a stochastic approach to a system, or risk balancing/re-balancing using the cycle time (demand speed) and shifting from an assembly line approach toward a demand (supply) chain, and presents a fundamental theory for the cost/profit balancing of excessive penalties derived from demand speed. First, the two cost approaches are prepared based on balancing issues. Next, line balancing using expected cost is summarized, and chain balancing using stochastic cost is discussed. Finally, these two in-teresting problems for balancing are discussed in terms of future developments in the world of the invisi-ble hand (demand speed).
English

Analytical study of Technology Transfer and Its Industrial Implementation (TTTI) Based on Industry- Academia- Government Collaboration
N. Fujikawa; M. Matsui
Journal of Industrial Management Association, 61, 02, 54-64, 2010, Peer-reviwed
Japanese

A Study of the Optimal Switching Point in a Limited-Cycle Problem with Multiple Periods
H. Yamamoto; J. Sun; T. Oishi; M. Matsui
Journal of Industrial Management Association, 61, 04, 234-243, 2010, Peer-reviwed
Japanese

Enterprise modeling and integration: A stochastic management approach
Masayuki Matsui
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, ELSEVIER SCIENCE BV, 122, 1, 485-491, Nov. 2009, Peer-reviwed, Recently, my book by Matsui has been published in Japanese, and the title is "Management of Manufacturing Enterprise: Profit Maximization and Factory Science." Enterprise/Factory Science means the system science of the 3M & I, in which is the complex of huMan, Material/Machine, Money and Information, and would contribute to enterprise modeling and integration issues. This paper presents the problem of enterprise/factory science, and discusses a class of 3M & I system by a stochastic management approach. First, the 3M & I system is defined, and a variety vs. structure is introduced. Next, the two structures of management are distinguished, and the demand-to-supply and process-cycle management are discussed by structural modeling. (C) 2009 Elsevier B.V. All rights reserved.
Scientific journal, English

A performance evaluation of disassembly systems with reverse blocking
Tetsuo Yamada; Naoyuki Mizuhara; Hisashi Yamamoto; Masayuki Matsui
COMPUTERS & INDUSTRIAL ENGINEERING, PERGAMON-ELSEVIER SCIENCE LTD, 56, 3, 1113-1125, Apr. 2009, Peer-reviwed, For sustainable manufacturing, manufacturers should construct and design inverse manufacturing systems consisting of assembly and disassembly systems. The sorting process in the disassembly system is the first process of the whole inverse manufacturing system. Therefore, it can become a bottleneck and decrease the productivity of the whole inverse manufacturing systems.
This study focuses on a disassembly system with reverse blocking in a sorting process [Yamada, T., & Matsui, M. (2003). Disassembly production systems and its design issues. Reprints of Japan Industrial Management Association, Spring meeting, Chofu, Japan, May, 144 145 (in Japanese)]. It generalizes the queuing model and discusses the performance of the disassembly system by mathematical and numerical analysis. First, the sorting process with reverse blocking is generally modeled as a queuing system. Next, the stationary state equations of the system are formulated, and the objective function is set as the throughput. Finally, the system performance is discussed by mathematical and numerical analysis in cases of a different number of stations and buffers, and also an example of the system design is shown and discussed in view of the busy rate, blocking probability and throughput. (C) 2008 Elsevier Ltd. All rights reserved.
Scientific journal, English

Parallel SCM: Balancing Issues of Make-or-Buy and Supplier-Retailers Types
M. Matsui; Y. Dai
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 60, 01, 1-10, 2009, Peer-reviwed, It is well known that SCM has an effect that reduces the extra stock and the cost of system, but how it can make all enterprises achieve the maximal profit is becoming the new problem in the institutional view. First, the two parallel SCM models are identified and formulated on the queueing base of Make-or-Buy and Supplier-Retailers types. Next, the problem of ellipse hypothesis in SCM is numerically discussed in the integral balancing view. Integral balancing means that both economics (profit) and reliability (workload) hold in autonomous balancing by cycle-time sharing. In particular, a feature map in a balance matrix is suggested for a win-win strategy, and is compared to the ellipse theory in the serial SCM type.
English

A Theory and Tools for Collaborative Demand-to-Supply Management in the SCM Age
A. Hayashi; N. Ishii; M. Matsui
Operations and Supply Chain Management, 2, 2, 111-124, 2009, Peer-reviwed
English

A-7 Development and Preliminary Evaluation of a Learning System on Demand-to-Supply Management for Sustainable Corporate Management
HAYASHI Akihiko; ISHII Nobuaki; MATSUI Masayuki
Proceedings of International Association of P2M, International Association of P2M, 2008, 52-61, 26 Apr. 2008, Under today's increasing demand variety and shorten product life cycle, most companies request introduction of the Demand-to-Supply management, which maximizes profit by collaborating sales department and production department, in order to realize sustainable corporate management. This paper proposes a Demand-to-Supply management learning system using a Demand-to-Supply planner and a scheduler. The learning system is applied to a class of a graduate school, and effectiveness of the system is evaluated.
Japanese

A Comparative Study of Efficient Assembly Systems Operating under Viable Demands
T. Yamada, S. Kakefuda, H. Nagatomo, M. Matsui
Journal of Japan Industrial Management Association, 59, 1, 1-10, 2008, Peer-reviwed
English

A Control Chart Design used in Supply Chain Management System
Jing Sun; Masayuki Matsui
International Journal of Management Science and Engineering Management, 3, 3, 211-219, 2008, Peer-reviwed, This paper presents a design of the x− control chart used in supply chain management system to improve customer satisfaction of supplier. Recently, due to ever increasing competition in supplier markets, it is demanded to offer the low-cost and high quality product in short due time. Therefore, studying the balance of quality and the due time and cost has become a new problem to supplier. In short run process, the time of treating an assignable cause (ACT time) is an important effect to the total cost and due time. To resolve the above problem, in this research, first a design of the control chart is developed in which the ACT time was considered. Then, from an economic viewpoint, the mathematical formulations which correspond to the design are shown. Finally, by numerically consideration, the balance of quality (control limits width) and due time and the total expectation cost is discussed, and the important relations between the due time, ACT time and the total expectation cost are investigated. © 2008 Taylor &
Francis Group, LLC.
Scientific journal, English

Development and Preliminary Evaluation of a Learning System on Demand-to-Supply Management for Sustainable Corporate Management
A. Hayashi; N. Ishii; M. Matsui
Journal of the International Association of Project & Program Management, International Association of P2M, 3, 1, 51-60, 2008, Peer-reviwed, Under today's increasing demand variety and shorten product life cycle, most companies request introduction of the Demand-to-Supply management, which maximizes profit by collaborating sales department and production department, in order to realize sustainable corporate management. This paper proposes a Demand-to-Supply management learning system using a Demand-to-Supply planner and a scheduler. The learning system is applied to a class of a graduate school, and effectiveness of the system is evaluated.
Japanese

A design Approach to Stochastic Mixed-Line with Look-Ahead
K. Abe; T. Yamada; M. Matsui
Journal of Japan Society of Logistics System, 7, 1, 33-47, 2007, Peer-reviwed
Japanese

A Basic Study for Strategic Supply Chain Balancing
M. Matsui; M. Motohashi
Journal of Japan Society of Logistics System, 7, 1, 21-31, 2007, Peer-reviwed
Japanese

A Branch and Bound Method for the Optimal Assignment during a Limit-Cycle Problem with Multiple Periods
H. Yamamoto; M. Matsui; X. S. Bai
Journal of Japan Industrial Management Association, 58, 1, 37-43, 2007, Peer-reviwed
Japanese

A Study of the PDCA and CAPD Economic Design of the x-bar Control Chart
J. Sun, M. Tsubaki, M. Matsui
Industrial Engineering and Management Systems An International Journal, 6, 1, 11-21, 2007, Peer-reviwed
English

The PDCA and CAPD Economic Models of the P Control Chart
Jing Sun; Michiko Tsubaki; Masayuki Matsui
International Journal of Productivity and Quality Management, 2, 3, 365-386, 2007, Peer-reviwed, Recently, more attention has been paid to the PDCA and CAPD processes of quality management for raising the efficiency of management in the industry (Ikezawa, 1985
Shiba and Walden, 2001
Matsui, 2005). When the P control chart is used in the short production run, in order to raise the efficiency of management, two cases often take place. One case starts from deciding the control lines, and then maintains the process with them
the other case starts from searching an assignable cause in the out-of-control state. In this paper, we propose both the PDCA and CAPD model of P control chart based on these two cases, and show their mathematical formulations. Then, from an economic viewpoint, we discuss the effect of Pa (power) on Ct (the total expectation cost) of the two models, and investigate the optimal value of sampling interval (vi) to minimise Ct in detail. Finally, by numerically analysing the two models, we found the new relationship between the key time parameters and Ct, respectively. Copyright © 2007 Inderscience Enterprises Ltd.
Scientific journal, English

An Economic/Lead-Time Design Comparison and Map for Central Server Systems Including FMS
M. Matsui, L. Wang
International Journal of Automation Technology, 1, 1, 35-44, 2007, Peer-reviwed
English

A Demand-to-Supply Development System for Sustainable Business Strategies and a Case Study
M. Matsui; T. Nakamura; N. Ishii
Journal of Japan Industrial Management Association, 58, 4, 307-316, 2007, Peer-reviwed
Japanese

Management Game Theory: Manufacturing vs Service Enterprise Type
M. Matsui
International Journal of Productivity and Quality Management, 1, 2, 103-115, 2006, Peer-reviwed
English

A Basic study on a Limit-Cycle Problem with Multi Periods and the Optimal Assignment Problem
H. Yamamoto; M. Matsui; J. Liu
Journal of Japan Industrial Management Association, 57, 1, 23-31, 2006, Peer-reviwed
Japanese

A Construction and Theory of Manager-Aided Planner for Collaborative Demand and Supply
M. Matsui, Y. Takahashi, Z. Wang
Journal of Japan Industrial Management Association, 57, 2, 120-131, 2006, Peer-reviwed
Japanese

Strategic Selection of Assembly Systems under Viable Demands
Tetsuo Yamada; Kakefuda Satomi; Masayuki Matsui
ASSEMBLY AUTOMATION, EMERALD GROUP PUBLISHING LIMITED, 26, 4, 335-342, 2006, Peer-reviwed, Purpose - Aims to strategically compare assembly lines to cell production including flexible cell system (FCS) under viable demands using the pair matrix table by the lot size and the number of stations and select the efficient assembly systems on demand fluctuations.
Design/methodology/approach - This paper sets an assembly problem of the respective models for assembly line systems, autonomous cell system and FCS, and presents a comparative approach by the pair matrix table for the strategic selection, The simulators were constructed for the respective models, and the pair matrix tables with the profit and lead time were drawn and shown.
Findings - Finds that the pair matrix table by the lot size and the number of stations are applicable in the strategic selection for comparative assembly systems, and FCS, consisting of multiple self-completion stations connected by conveyors, is stable when there are viable changes in the demand quantity and the number of stations.
Research limitations/implications - Provides an economic comparative approach for a strategic selection in assembly models with different system configurations by simulation. Practical implications - The approach proposed in this paper will provide a strategic selection quantitatively with system managers to achieve higher profit and shorter lead times under viable demands.
Originality/value - introduces the pair matrix table by the lot size and the number of stations, and compares strategically and quantitatively the respective assembly models based on an optimal design by the two-stage design method in view of profits and lead times under viable demands.
Scientific journal, English

Economic Models of x-bar Chart with Tardiness Penalty in Finite Due Time Processes
J. Sun; M. Tsubaki; M. Matsui
Journal of Japan Industrial Management Association, 57, 5, 374-387, 2006, Peer-reviwed
Japanese

CSPS model: Look-ahead controls and physics
Masayuki Matsui
International Journal of Production Research, TAYLOR & FRANCIS LTD, 43, 10, 2001-2025, 15 May 2005, Peer-reviwed, This paper reviews look-ahead controls for a Conveyor-Serviced Production Station (CSPS) model, clarifies the structure of effective control (operating) policies, and gives a physical theory on look-ahead control and loss system. First, seven operating policies for the CSPS model are analyzed and compared on the mean delay-time. The proposed Reserve-dependent and Sequential Range Policy (RdSRP) is optimal among any stationary policies. Next, the mean number of overflows at CSPS is analytically obtained for the policy SRP, a special case of RdSRP. The linear relation of this and mean delay-time is found (Matsui, M., Shingu, T. and Makabe, H., An analysis of conveyor-serviced production station by queueing theory. Journal of Japan Industrial Management Association, 1978, 28, 375-386 (in Japanese).), and is generalized by sample path method. © 2005 Taylor &
Francis Group Ltd.
Scientific journal, English

Progressive-Curve-Based Control of Inventory Fluctuation under On-Demand SCM
M. Matsui; H. Uchiyama; H. Fujikawa
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 56, 2, 139-145, 2005, Peer-reviwed, In modern enterprises, the problem of balancing supply and demand becomes important, and the supply chain management (SCM) becomes the focus of attention. Under on-demand SCM, it is important to reduce the risk of supply chain over/under-stocking in real time. To hedge the risks, the equation of flow control is re-considered, and a dynamic logic control is introduced. For the logistics of PC products, this paper develops a look-ahead control logic based on a progressive curve. For simplicity, it is assumed that the demand (output) is uncontrollable (given), and the supply (input) is controllable (manageable) on the basis of base-inventory only. First, the moving base-inventory is obtained from the formulation of a Newsboy problem. Next, this indicator is checked by a cumulative control chart in quality control, and supply action (input) is carried out timely, within the upper limit. In this study, this method is applied to the warehouse company A, and a cumulative inventory reduction of approximately 42% is attained.
Japanese

A Management Cycle Model: Switching Control under Lot Processing and Time Span
M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 56, 4, 256-264, 2005, Peer-reviwed, From the standpoint of operations management, we focus on a management cycle that consists of plan (P), do (D), check (C) and act (A) phases, and concern with the difference between PDCA and CAPD cycles. This paper studies a mathematical/stochastic modeling of the management cycle under lot processing and time span. This modeling is called the type of (t, k; T)-switching policy, in which the notations t, k and T means the review period, control limit and time span (due time), respectively. First, the switching modeling of the look-ahead (back) in PDCA (CAPD) is presented by stochastic approach, and corresponds to the trade-off problem of earliness (c_2) and tardiness (c_3) from time span (T). Next, the expected operating cost per unit produced is given by mathematical formulation, and the exponential processing type is treated as a special case of general service. Finally, the problem of optimal look-ahead/back strategy is numerically discussed and clarified on the base of(c_3, c_2)-strategy map in the fixed or variable T. In addition, an application to MRP/APS etc. is noted.
English

Selling and Manufacturing can Collaborate Profitably
M. Matsui; H. Fujikawa
DIAMOND Harvard Business Review, ダイヤモンド社, 30, 1, 72-83, 2005, Peer-reviwed, Invited
Japanese

A Case Study on Setting of Safety Stocks in SCM/MRP
Y. Himoto; A. Saito; M. Matsui
Journal of Japan Industrial Management Association, 55, 1, 51-58, 2004, Peer-reviwed
Japanese

A Design Problem of Assembly Line Systems using Genetic Algorithm under the BTO Environment
Kazuaki Abe; Tetsuo Yamada; Masayuki Matsui
IEEJ Transactions on Electronics, Information and Systems, 124, 10, 2006-2013, 2004, Peer-reviwed, Under the BTO environment, stochastic assembly lines require design methods which shorten not only the production lead time but also the ready time for the line design. We propose a design method for Assembly Line Systems (ALS) in Yamada et al. (2001) by using Genetic Algorithm (GA) and Adam-Eve GA, in which all design variables are determined in consideration of constraints such as line length related to the production lead time. First, an ALS model with a line length constraint is introduced, and an optimal design problem is set to maximize the net reward under shorter lead time. Next, a simulation optimization method is developed using Adam-Eve GA and traditional GA. Finally, an optimal design example is shown and discussed by comparing the 2-stage design by Yamada et al. (2001) and both the GA designs. It is shown that the Adam-Eve GA is superior to the traditional GA design in terms of computational time though there is only a slight difference in terms of net reward. © 2004, The Institute of Electrical Engineers of Japan. All rights reserved.
English

Game-like e-Learning and Strategic Map of Demand-on-Supply Management
M. Matsui, Y. Takahashi
Journal of Japan Industrial Management Association, 55, 5, 262-272, 2004, Peer-reviwed
Japanese

Strategic Management/Design Approach to a Job-Shop Production System
M Matsui; Y Nakada
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, TAYLOR & FRANCIS LTD, 41, 14, 3267-3271, Sep. 2003, Peer-reviwed, A macro-level (or economic) model of a job-shop is proposed and developed for periodic and dynamic types. A strategic management/design approach is discussed by applying the two-stage design method. It gives the problem of setting the economic leadtime in the respective models. The existence of economic leadtime is ascertained numerically, and a design comparison of a periodic versus a semidynamic type is given. The pair-matrix table consisting of economics and reliability elements is then given for summary, and a strategy for demand-to-supply management is discussed on ellipse shape. Finally, an real situation is introduced and the validity of modelling shown.
Scientific journal, English

A management Design Approach to Assembly Line Systems
T Yamada; M Matsui
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, ELSEVIER SCIENCE BV, 84, 2, 193-204, May 2003, Peer-reviwed, This paper presents a management design approach to assembly line systems (ALS) by considering both the cost and leadtime under demand fluctuations. First, a design procedure based on the 2-stage design method is presented for the ALS with and without stoppers in the installation case of production facilities. Next, the strategic relation of economic traffic and leadtime is considered by introducing the production matrix table. Finally, a positioning strategy (cycle time and number of stations) is discussed for a case in which the leadtime is restricted. (C) 2002 Elsevier Science B.V. All rights reserved.
Scientific journal, English

Analysis of Cooperation Effects in Two-Center Production Models
M Matsui; S Aita; SY Nof; JH Chen; Y Nishibori
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, ELSEVIER SCIENCE BV, 84, 1, 101-112, Apr. 2003, Peer-reviwed, This paper presents and considers a pair-wise agent modeling of integration by multi-agent approach. The pair-wise agent model consists of the two distributed centers: the sales center and the production center, and the role of pair-wise agent is to achieve the manufacturing systems' goal.
First, the three types of pair-wise agent model are identified, and are formulated on the base of job-shop model. Next, the problem of maximizing the marginal profit (=accepted price-operating cost) is discussed from a view of communications in integration by queueing simulation. Finally, a condition for the better collaboration/integration is suggested. (C) 2002 Elsevier Science B.V. All rights reserved.
Scientific journal, English

A Game Approach to SCM: Modeling, Formulized Example and Integral Optimization
M. Matsui; S. Ichihara
Journal of Japan Society of Logistics System, 4, 1, 67-80, 2003, Peer-reviwed
Japanese

A Queuing/Management Consideration on Japanese Production Systems
M Matsui
PRODUCTION PLANNING & CONTROL, TAYLOR & FRANCIS LTD, 13, 8, 688-701, Dec. 2002, Peer-reviwed, A single-stage lot/cell production under a Poisson arrival and exponential service in a batch is considered. The three economic queuing models of push and pull types are presented, an economic comparison of push versus pull types is considered, and a strategic management/design consideration to the lot production is given. First, the total expected operating cost is given for the three queuing models including the Omote-Kanban type similar to VMI. Second, the push versus pull system is discussed from a view of setup time, inventory or operating cost, and it is ascertained that the three types are alternative. Finally, a strategic management basis for economic traffic, leadtime setting is given, and discussed by the introduction of production matrix on 2-stage design.
English

Performance Evaluation of a Flexible Machining/Assembly System and Routing Comparisons
JS Ma; M Matsui
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, TAYLOR & FRANCIS LTD, 40, 7, 1713-1724, May 2002, Peer-reviwed, This paper discusses the performance evaluation of the flexible machining/ assembly systems (FMS/FAS) of a central server type, and gives a comparative consideration of a fixed, dynamic versus an ordered-entry routing rule. First, the steady-state equations are given, and the system throughput is obtained. Next, the system configurations of FMS/FAS are numerically discussed on the basis of system throughput. Finally, the superiority of an ordered-entry routing rule is numerically discussed for development of routing theory.
Scientific journal, English

A Management Design Approach to a Simple Flexible Assembly System
N Nakase; T Yamada; M Matsui
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, ELSEVIER SCIENCE BV, 76, 3, 281-292, Apr. 2002, Peer-reviwed, This paper considers the simple flexible assembly system (simple FAS) consisting of Generalized CSPSs, and presents a strategic management design approach to stochastic system balancing problems of simple FAS. First, the simple FAS is briefly outlined. Next, the 2-stage design procedure is presented to both types of the existing and installation problems of production facilities. Third, an optimal design example is shown and discussed numerically. Finally, the production matrix tables of both types are given under the cycle time, d, and the number of Generalized CSPSs, K, and a strategic relation of economic traffic (d, K) and leadtime is discussed. From these discussions, it is shown that the proposed approach is very useful. (C) 2002 Elsevier Science B.V. All rights reserved.
Scientific journal, English

A Management Game Model: Economic Traffic, Leadtime and Pricing Setting
M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 53, 1, 1-9, 2002, Peer-reviwed, Recent market conditions require flexible or higher speed for products to reach markets. This speed is limited by a bottleneck under market/production capacity, and this problem is known as the theory of constraints (TOC) in the supply chain management (SCM). The model here proposed originates in a paper by Matsui (1983, 1988), and has quite a distinctive origin in comparison to the bottleneck theory in TOC. This paper presents a new management model of enterprises (MGM), gives a design or decision-making method for management, and discusses the similarities of the model in comparison with the theory of constraints (TOC). First, the MGM model is presented as the pair-type cooperative vs. non-cooperative game model of maximizing the throughput, i.e., the marginal profit between the sales price and the operating cost per unit time, under a bottleneck dependent to demand (market)/supply (production). Next, the 2-stage design method proposed determines the economic traffic of market/production in the first stage (economics), and sets the economic leadtime/pricing and constraints under the economic traffic in the second stage (reliability). Finally, a special example of MGM is given and considered under a M/M/1 enterprise model, a variety of management solutions/designs is discussed on a pair-matrix table, and a comparison to bottleneck solutions is noted.
English

2-Stage Design for a Job-Shop Production System with Backlog Control and Its Application Study
M. Matsui; Y. Nakada; M. Yasuda; T. Kamigaki; H. Ohshio
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 53, 2, 170-177, 2002, Peer-reviwed, Suppose that a manager controls a job-shop production system with the backlog by order-selection and switch-over. This paper discusses the 2-stage design problem of the job-shop production model with backlog control from the views of theory and an application study. For this purpose, we apply the 2-stage design method (Matsui, 1999) to the two models : periodic and semi-dynamic types. By the 2-stage design method, the economic traffic that maximizes the net reward (=reward-cost) is decided at the first stage. At the second stage, the economic leadtime is set under the economic traffic. First, a behavioral comparison of discrete and continuous types is given by simulation, and the 2-stage design method for continuous type is showed. Next, the periodic and semi-dynamic models of A company are given under three cases and eight arrival patterns, and the usefulness and robustness of the 2-stage design method are exhibited.
Japanese

2-Stage Design Method for Assembly Line Systems: A Unified Approach
T. Yamada; M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 51, 6, 538-549, 2001, Peer-reviwed, Assembly factories often consist of multiple production stations connected by conveyors to transport and store materials. In assembly manufacturing, among systems using conveyors, there are two major types of array for unit stations : the line type and the flexible type, and they differ in material flows of processed and overflowed items. The former system is known as Assembly Line Systems (ALS), in which each station has the two cases with and without stoppers. This paper focuses on the case without stoppers, considers the design problem as a coordination problem between unit stations (Generalized CSPSs) by using the station-centered approach, and proposes a 2-Stage Design Method for integrating the line balancing and stochastic buffer design problems. In this method, the preliminary stage is to set an initial value for the cycle time given the number of stations, production planning quantity and production planning period. The first stage is to decide the economic cycle time for minimizing the total expected operating cost. The second stage is to decide the economic buffers for minimizing the total expected operating cost under the economic cycle time, and the first and second stages are repeated till the minimal cost is attained. First, we consider the station-centered vs. system-centered approach to the ALS without stoppers, and show the effectiveness of the former. Next, the 2-Stage Design Method by that approach is proposed, and the merits are shown by an optimal design example. In addition, generalizations about the given cycle time and finite working zone are numerically discussed.
Japanese

2-Stage Design Method for Assembly Line System with Stoppers
T. Yamada; M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 51, 6, 594-602, 2001, Peer-reviwed, In assembly systems, there are two major types of array of unit stations : the line type (ALS) and the flexible type (FAS). Using a unified approach (Yamada and Matsui, 1997,1999), this paper discusses a stochastic design problem of the ALS with stoppers which prevent the overflow of items. First, the objective function for the station-centered approach is considered. A simple case of D/M/1 type by queueing approach and a typical case of D/E_k/1 type by simulation are introduced, and the 3-station case is considered by comparing the two cases of balking and blocking. Next, the 2-stage design procedure for the ALS with stoppers is presented, and the two cases of ALS with and without stoppers are unified. Finally, an optimal design example is shown by applying this procedure, and the two cases are compared numerically.
English

A Queuing Consideration for Japanese Production System and Its 2-Stage Design
M. Matsui; C. Zhang; S. Ichihara
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 52, 2, 69-79, 2001, Peer-reviwed, This paper presents three economic queueing models of push and pull types, discusses the limits of pull on Japanese production systems, and considers the problem of setting the economic leadtime by 2-stage design metbod. A single-stage lot/cell production system under make-to-order/stock is here treated, and is assumed to be Poisson arrival and exponential service in batch. First, we give the expected operatian cost of three queueing models. This cost consists of inventory/order, backlog, busy, and idle costs, and the bebaviours of these costs are showed as a function of mean processing time or fixed setup time. The optimal(or economic)traffic exists, and the minimum operating cost is found grapbically. Second, the push vs.pull system is discussed from a view of inventory or operating cost. One limitation of the pull system is that a reduction in setup-time can cause the inventory cost to inflate, and a minimum operating cost exists. Another limitation is that the pull system is specially better for the case that the inventory cost is important to managers, but that a backlog is allowed. Third, a scientific basis of economic leadtime setting is given by 2-stage de-sign method. The economic processing time is obtained at the first stage, and the economic leadtime can be set at the second stage under the economic processing time. The economic leadtime of a pull system is not necessarily better than that of a push system.
Japanese

The Performance Evaluation of Flexible Manufacturing Systems with Finite Local Buffers: Fixed and Dynamic Routings
M Matsui; S Uehara; JS Ma
INTERNATIONAL JOURNAL OF FLEXIBLE MANUFACTURING SYSTEMS, KLUWER ACADEMIC PUBL, 13, 4, 405-424, 2001, Peer-reviwed, This article evaluates the performance of flexible manufacturing systems with finite local buffers and fixed or dynamic routing rules, and addresses the optimal design or system configuration problem of maximizing the system throughput. The costs include machine cost, part (or pallet) cost, and local buffers cost. First, the system throughputs and their behaviors are considered with both queueing network analysis and simulation, and it is shown for a fixed routing model that the system throughput in the case of finite local buffers is greater than in the case of infinite local buffers. For a fixed versus dynamic routing rule, it is also found that the throughput in the former case can be close to the one in the latter case by changing the setting parameters. Next, the design problems of maximizing the system throughput are considered numerically for fixed and dynamic routing cases. Then, it is seen that better combination of design variables is a class of the monotonicity in local buffers, service rates, and routing probabilities.
Scientific journal, English

Optimal Control of a Job-Shop Production System: Periodic versus Dynamic Type
M Matsui; K Kaneda; K Kanbara
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, TAYLOR & FRANCIS LTD, 38, 13, 2951-2966, Sep. 2000, Peer-reviwed, Following recent work of Matsui, Yang and Miya, the authors assume that jobshop production systems consist of the sales centre-with order-selection-and the production centre-with switch-over. This paper studies on the control problem of a job-shop Production system of periodic versus dynamic type. First, a stochastic model of semi-dynamic type is proposed, and the two sub-objective functions: the mean accepted price and the mean operating cost, are given. Next, a cooperative versus non-cooperative problem of sales and production centres is discussed, and the non-monotonicity of optimal selection criteria is again found. Finally, a comparison of the alternative periodic, dynamic and semi-dynamic types is given, and the optimal structure is found.
Scientific journal, English

A New Method for Coordinate Type Facilities Layout Using Locatable Edges
X. Pang; A. Suzuki; M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 50, 6, 381-388, 2000, Peer-reviwed, This paper presents a new approach to the coordinate type facilities layout problem. The site and each facility location are represented in a coordinate system. The objective is to minimize the total cost incluing the material handling cost and site areas cost, and maximize a closeness rating measure. We present "locatable edges" for the facility arrangement in order to restrain the search space. The results indicate that the model does an excellent job for the facilities layout problem with unequal areas as well as with equal areas, and that the ability to handle large scale problems is also improved.
Japanese

The Leadtime of a Job-Shop Production System and Its 2-Stage Design
M. Matsui, Y. Nakada, K. Kaneda
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 51, 2, 124-131, 2000, Peer-reviwed, Suppose that a job-shop production system consists of a sales center with order-selection and a production center with switch-over. These main models are of periodic and semi-dynamic types. This paper discusses the problem of setting the leadtime of the two models and gives a scientific basis for economic leadtime. For this purpose, we apply the 2-stage design method to the two models. By the 2-stage design method, the economic traffic that maximizes the net reward (=reward-cost) is decided at the first stage. At the second stage, the economic leadtime is set under the economic traffic. First, the respective mean leadtimes are given by the corresponding stochastic models. The mean leadtimes are then obtained from the total mean holding time divided by the number of mean processing units. Next, the respective behaviors of net rewards and leadtimes are numerically considered under the four traffic variables, two selection criteria and two control levels. The existence of economic leadtime is ascertained here. Finally, a comparison of periodic and semidynamic types is given, and a sensitivity analysis of leadtime is shown. Generally, the semi-dynamic type is superior to the periodic type in terms of the economic leadtime.
Japanese

Communication Based Coordination Modeling in Distributed Manufacturing Systems
JA Ceroni; M Matsui; SY Nof
Corresponding, INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, ELSEVIER SCIENCE BV, 60-61, 281-287, Apr. 1999, Peer-reviwed, Global markets are increasingly demanding organizations to collaborate and coordinate efforts for coping with distributed customers, operations, and suppliers. An important aspect of the collaboration process of distributed, often remote organizations is the coordination cost. The coordination equipment and operating costs limit the benefit attainable from collaboration. In certain cases, this cost can turn the interaction among distributed organizations non-profitable. Previous research investigated a distributed manufacturing case, operating under a job-shop model with two distributed collaborating centers, one for sales and one for production. A new model incorporating the communication cost of coordination has been developed and yields the net reward of the total system, determining the profitability of the coordination. Two alternative coordination modes are examined: (1) distributed coordination by the two centers; (2) centralized coordination by a third party. The results indicate that distributed and centralized coordination modes are comparable up to a certain limit; over this limit distributed coordination is always preferred. A key conclusion is that distributed coordination should always be preferred (to centralized coordination) when the hardware costs for the distributed system are less than or to half the hardware costs of the centralized system. (C) 1999 Published by Elsevier Science B.V. All rights reserved.
Scientific journal, English

Optimal Control of a Job-Shop Production System with Order-Selection and Switch-Over
M Matsui; G Yang; T Miya
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, TAYLOR & FRANCIS LTD, 37, 1, 73-90, Jan. 1999, Peer-reviwed, Suppose that job-shop production systems consist of a sales centre with order-selection and a production centre with switch-over. We consider the control problem of maximizing the marginal profit of a job-shop production system with order-selection and switch-over. First, a stochastic model is proposed to derive the two sub-objective functions: the mean accepted price and the mean operating cost. Next, the stochastic model is formulated in two ways as the cooperative versus non-cooperative control problem of sales and production centres. Finally, the non-monotonic structure of optimal order-selection criteria is found, and the demerit of non-cooperative control is numerically discussed.
Scientific journal, English

Performance Evaluation of a Simple Flexible Assembly System and Its 2-Stage Design
S. A. Feyzbakhsh, A. Kimura, M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 49, 6, 393-401, 1999, Peer-reviwed, Conveyors are used to transport or deliver material and also to store it, and the conveyor-serviced production systems (CSPSystems) generally consists of multiple generalized conveyor-serviced production stations (generalized CSPSs) (Matsui, 1993). This paper studies an ordered-entry array of unit stations, generalized CSPSs, called a simple flexible assembly system (simple FAS). In this station-centered approach, the main concern is a coordination problem or system balancing between generalized CSPs, and this design problem has not yet been discussed anywhere. From the view of performance evaluation, we first found that allowing for only an overflow from the last station is sufficient to minimize the total expected cost of simple FAS, and there is a limit point to decrease the overflow rate by increasing a coefficient of overflows. Also, the arrangement of heterogeneous servers gave a counter example that the best server's arrangement under the case of in-process inventory is established by arranging the ascending order of processing rates to decrease both the overflow rate and the total expected cost. Second, we propose a simple 2-stage design method for simple FAS, and discuss an optimal design procedure using the complex-type method or genetic algorithms. This basic idea (Matsui, 1994) originates in dividing some design variables into input/output variables like cycle time and buffer variables like look-ahead times and reserve capacities. In this method, the first stage is to set the parameters, the cycle time and the number of stations. The second stage is to design the buffers, the look-ahead times and the reserve capacities under the given traffic. Finally, a design example is given and discussed.
Japanese

Adam-Eve Genetic Algorithm: A Methodology for Optimal Design of a Simple Flexible Assembly System
S. Alireza Feyzbakhsh; Masayuki Matsui
Computers and Industrial Engineering, Elsevier Science Ltd, 36, 2, 233-258, 1999, Peer-reviwed, The assembly process is an essential part of the total manufacturing process in today's manufacturing system. The simple Flexible Assembly System (FAS) which is proposed in this article includes a set of Removal Item Case (RIC) of Generalized CSPS workstations. Since there are numerous system parameters and variables with considerable interaction, the optimal design of the system seems to be a complex task. An Adam-Eve-like GA was introduced and proposed in order to design the simple FAS. Taking a hint from nature, the proposed method has some special characteristics which distinguish it from others. A comparison between the Adam-Eve-like GA and traditional GAs was conducted. Based on the results from an optimization standpoint, the Adam-Eve-like GA seems to produce reasonable engineering results in an inherently difficult area where few other techniques are available. Findings suggest that it may be beneficial to apply the Adam-Eve-like GA to other difficult optimization problems.
Scientific journal, English

Multi-Criteria Evaluation of Computer Integrated Enterprise Systems
A. Suzuki; K. Yura; L. B. Vlacic; M. Matsui; Y. Ogiwara
Journal of the Japan Society for Management Information, 経営情報学会誌編集事務局, 8, 3, 41-54, 1999, Peer-reviwed
Japanese

Optimal Design of a Generalized Conveyor-Serviced Production Station: Fixed and Removal Item Cases
SA Feyzbakhsh; M Matsui; K Itai
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, ELSEVIER SCIENCE BV, 55, 2, 177-189, Jul. 1998, Peer-reviwed, This paper treats an approach to the optimal design of the conveyor system such that arrival/service times vary in a probabilistic manner. The single station model here considered is both cases of a single generalized conveyor-serviced production station (generalized CSPS) by Matsui (1993), i.e., fixed item case (FIC) and removal item case (RIC). A methodology to design simultaneously both cycle (mean-interarrival) time and buffers is proposed, and the two-step method and the Complex-type method for FIC and RIG, respectively, are given and discussed numerically. In addition, by use of the proposed methods the effectiveness of the look-ahead time are included. (C) 1998 Elsevier Science B.V. All rights reserved.
Scientific journal, English

Queuing Analysis and Optimal Control of a Job-Shop Production System of Dynamic Type
K. Kanbara, K. Tamaki, M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 49, 5, 327-337, 1998, Peer-reviwed, Suppose that a job-shop production system consist of a sales center with order-selection and a production center with switch-over. Job orders have variable estimated prices and arrive frequently at irregular or random intervals under a changeable production capacity. The macro-level problem considered is summarized as follows. Accepting all orders is not always the best option due to changeable capacity considerations. A manager of job shops is faced with the problem of selecting and processing the orders according to some decision rule, and that of increasing the idle (opportunity) cost of a job shop. We will here decide the structure of the best decision rule under a dynamic job-shop production system. This paper discusses a typical dynamic job-shop model, in the case where fixed switching costs are assumed when two processing types are switched between each other. Four control variables are introduced : two selection criteria (c_1,c_2) and two control levels (i_1,i_2). First, a stochastic model is proposed to derive the two sub-objective functions : the mean accepted price and mean operating cost of the long-run average. Next, by numerical considerations, a cooperative vs.non-cooperative problem of sales and production centers and a periodic vs.dynamic model are discussed. Finally, a revised version of dynamic job-shop production is proposed, and the non-monotonicity of selection criteria (c^*_1,c^*_2) is pointed out.
Japanese

The Performance Evaluation of Flexible Manufacturing Systems with Dynamic Routing and Its Optimal System Configurations
S. Uehara, M. Matsui
Journal of Japan Industrial Management Association, 47, 2, 126-134, 1996, Peer-reviwed
Japanese

A practical Algorithm for Optimal System Configurations of Flexible Manufacturing Systems
S. Uehara; M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 47, 3, 207-218, 1996, Peer-reviwed, This paper studies the two types optimal configuration problems of Flexible Manufacturing Systems with large scale in the case of fixed vs. dynamic routing. First, a simplified calculation of throughput and practical algorithms are presented to short on the computation time. Next, it is ascertained that the proposed algorithms are more effective than implicit algorithms in the respective routings. Finally the performance of fixed routing model with optimized routing probabilities is compared to dynamic routing model, and an example of the optimal configurations for these models is given.
Japanese

Optimal Buffer Design of a Generalized Conveyor-Serviced Production Station
T. Minematsu; M. Matsui
Journal of Japan Industrial Management Association, 45, 6, 546-554, 1995, Peer-reviwed
Japanese

Optimal Arrival Schedule to a Generalized Conveyor-Serviced Production Station
K. Itai; M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 46, 3, 194-203, 1995, Peer-reviwed, This paper shows the existence of an optimal arrival schedule for the conveyor system without stopper. It also points out an economical reason why it is desirable to use a regular arrival schedule. Based on inspection theory, is given an interesting result that the optimal arrival schedule is a nonincreasing arrival schedule. Moreover, the optimal schedule can be achieved by introduction of a design factor, ε(0≤ε<1), under regular arrival. Finally, a comparison between regular and nonincreasing arrival schedule is made by some numerical examples, and the Generalized CSPS under the regular arrival is discussed.
Japanese

Job-Shop Control Policies under Fixed Switching-Costs: The Property of Optimal Policies
G. Yang; M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 46, 3, 212-224, 1995, Peer-reviwed, In this paper, the job-shop control policies of periodic vs. dynamic type under order-selection and fixed switching-costs are evaluated and discussed by the respective simulation models. The respective models incorporate fixed quoting/switching time in the previous analytic models, and have the two objective functions of the net reward (=price-cost) per unit time and the mean flow-time. Although the monotonicity of the optimal policy of periodic type does not necessarily hold, that of dynamic type is ascertained. Also, a comparison of the optimal policy of periodic vs. dynamic type is given.
Japanese

Work-Time Distributions of a Generalized Conveyor-Serviced Production Station
Y. Gao; M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 44, 6, 526-534, 1994, Peer-reviwed, Both delay-time and work-cycle time distributions of a generalized model of conveyor-serviced production station (Generalized CSPS) are concretely obtained, and the policy RdSRP for Generalized CSPS is discussed from a view of the above two work-time distributions. By numerical considerations, the following results are found : First, from a comparison of distributions, the policy RdSRP is superior to the policy SdSRP. Second, it is such a look-ahead interval (or time-range) that minimizes a variance of delay-times or a tail probability of work-cycle times. In conclusion, the policy RdSRP is superior in not only mean value but also variance.
Japanese

A Job-Shop Control Policy under Fixed Switching-Costs: Periodic Type
G. Yang; M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 45, 4, 360-371, 1994, Peer-reviwed, This paper discusses a typical job-shop control policy of a periodic type in the case where fixed switching costs are assumed when two processing types are switched from each other. First, the net reward (=price-cost) per unit time is represented by an embedded approach. Second, the problem of maximizing it with respect to two selection criteria and two switching levels are solved by using Tijms' algorithm (1980). Finally, by a numerical consideration, it is showed that the monotone contol policy would not be necessarily optimal.
Japanese

The Performance Evaluation of Flexible Manufacturing Systems with Finite Local Buffers and Its Design Problem
S. Uehara; M. Matsui
Journal of Japan Industrial Management Association, 45, 5, 464-471, 1994, Peer-reviwed
Japanese

A Generalized Model of Conveyor-Serviced Production Station
M. Matsui
Lead, Journal of Japan Industrial Management Association, 44, 1, 25-32, 1993, Peer-reviwed
Scientific journal, Japanese

Job-Shop Control Policies
G. Yang; M. Matsui
Journal of Japan Industrial Management Association, 44, 5, 416-426, 1993, Peer-reviwed
Japanese

Order-Selection and Switch-Over Policies for Controlling the Backlog
H. Fujiwara; M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 40, 4, 218-224, 1989, Peer-reviwed, Consider a job-shop production system where orders arrive in accordance with a Poisson process. Each order involves an amount of work which is known upon arrival, is sampled from an exponential distribution, and is independent of the reward of orders. For controlling the backlog, a manager selects the orders arriving beyond a criterion of the reward, and uses available two constant service rates. This paper treats the simple policies of maximizing the long-run average return, and discusses a class of the 2-level control problem.Finally, a numerical example is given.
Japanese

On a Joint Policy of Order-Selection Policies for a Job-Shop Production System
M. Matsui
Journal of Japan Industrial Management Association, 39, 2, 83-87, 1988, Peer-reviwed
English

Optimal Order-Selection Policies for a Job-Shop Production System
M MATSUI
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, TAYLOR & FRANCIS LTD, 23, 1, 21-31, 1985, Peer-reviwed
Scientific journal, English

Job-Shop Model: A M/(G,G)/1(N) Production System With Order Selection
M MATSUI
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, TAYLOR & FRANCIS LTD, 20, 2, 201-210, 1982, Peer-reviwed
Scientific journal, English

A M/G/1 (N) Production System with Order-Selection
M. Matsui
Journal of Japan Industrial Management Association, Japan Industrial Management Association, 33, 4, 278-286, 1982, Peer-reviwed, For the purpose of studying the optimal selection policies for order selection and process control in the job-shop, this paper, first, presents a M/G/1(N) production sysmte with six representative selection policies. N is the maximum number of backlog, and distribution of the profit of orders is of a general type. Second, the mean number of accepted orders, E(u), and the expected undiscounted reward per unit produced, R_0(f, N), are obtained using Markov decision processes. Third, both common and different natures of the six selection policies are discussed, and the structure of optimal selection policies is suggested.
Japanese

A Comparative Consideration of Operating Policies for Conveyor-Serviced Production Station
M. Matsui; T. Shingu; H. Makabe
Journal of Japan Industrial Management Association, 31, 3, 342-348, 1980, Peer-reviwed
Japanese

A Queueing Analysis of Conveyor-Serviced Production Station and the Optimal Range Strategy
松井正之; 新宮哲郎
AIIE Transactions, 10, 1, 89-99, 1978, Peer-reviwed
English

An Analysis of Conveyor-Serviced Production Station by Queueing Theory
M. Matsui; T. Shingu; H. Makabe
Lead, Journal of Japan Industrial Management Association, 28, 4, 375-386, 1978, Peer-reviwed
Scientific journal, Japanese

A Multichannel Queueing System with Ordered Entry and Heterogeneous Servers
MATSUI masayuki; FUKUTA jiro
Lead, AIIE Transactions, 9, 2, 209-214, 1977, Peer-reviwed
Scientific journal, English

A Study on the Characteristics of the Manufacturing Work Group
Y. Nagai; K. Tanaka; S. Une; M. Matsui; S. Tenda
Journal of Japan Industrial Management Association, 26, 2, 169-174, 1975, Peer-reviwed
Scientific journal, Japanese

A Queueing Analysis of Conveyor-Serviced Production Station with General Unit-Arrival
MATSUI masayuki; FUKUTA jiro
Lead, Journal of the Operations Research Society of Japan, 18, 3-4, 211-227, 1975, Peer-reviwed
Scientific journal, English

A Study of Job Attributes and the Worker in the Production Process
M. Matsui; H. Sanae
Lead, Journal of Japan Industrial Management Association, 25, 3, 202-207, 1974, Peer-reviwed
Scientific journal, Japanese

A study of the Characteristics of Some Work Group
S. Isotani; M. Matsui
Last, Journal of Japan Industrial Management Association, 41, 25-28, 1969, Peer-reviwed
Scientific journal, Japanese

Bodies Science, Hyperboloid type and Nested Economics—Sollen, Central Dualism and Chameleon's Criteria in Nature vs. Artifacts Body (II)
Masayuki Matsui
Lead, 19 Dec. 2021, 12th Conference, NPO: Transdisciplinary Federation of Science and Technology, Japanese, Summary national conference

My Industrial and Systems Eng. and its Academic Way
Masayuki Matsui
Lead, Jan. 2021, Communications of JIMA, 30, 2, 93-97, Japanese, Invited, Introduction scientific journal

Sollen, Central Dualism and Chameleon's Criteria in Nature vs. Artifacts Body
Masayuki Matsui
Lead, 09 Oct. 2020, OUKAN Conference 2020, 1-5, Japanese, Invited, Summary national conference

Knowledge Society and Information Inequality II: Pair-Map Creation, Chameleon's Diversity and Artifacts Management
Masayuki Matsui
Lead, 09 Oct. 2020, OUKAN Conference 2020, 1-5, Japanese, Invited, Summary national conference

企業ロボットの開発(3): ヒューマナイズドH=W系ロボットによる企業体の新・方法&時間研究法例
松井正之; 石井信明; 藤田恵理
Lead, Jun. 2020, 日本設備管理学会春季研究発表会予稿集, 40-43, Japanese, Summary national conference

A New Academic Discipline: Advancing factory science, economics and artifacts science
Matsui Masayuki
Lead, Jun. 2020, Research Outreach journal, 114, 82-85, English, Peer-reviwed, Invited, Introduction scientific journal

Knowledge Society and Information Inequality: Higher Management and Harmonic Integration vs. Sharing Issues
MATSUI Masayuki
Nov. 2019, 第10回横幹連合コンファレンス, 1-4, Japanese, Invited, Summary national conference

A Demand-to-Supply Enterprise Robot and ODICS II Type for Convenience Store Application
MATSUI Masayuki; Nobuaki ISHII
Aug. 2019, 2019 International Conference on Production Research, English, Peer-reviwed, Summary international conference

企業のマトリックス法—一般形式、産業連関決定法と業務適用方法論の考察
松井正之; 中島信; 仲田知弘
Lead, Oct. 2018, 第9回横幹連合コンファレンㇲ, Japanese, Invited, Summary national conference

企業ロボットの開発(2)：人工体原理によるコンビニ系企業ロボットの具現化問題とODICS II ベース例
松井正之; 石井信明
Oct. 2018, 日本経営子学会予稿, Japanese, Summary national conference

物理対経済体のサンドイッチ場考：待ち行列法によるペアマップ仮説と波動方程式化例
松井 正之
Jan. 2018, 待ち行列シンポジウム報文集2018, 16-22, Japanese, Summary national conference

松井の方程式のSW体図解：物理素粒子体、企業体・物理体の双対系鎖と需給格子解構造
松井 正之
Dec. 2017, 第8回横幹連合コンファレンス, A-5-1, Japanese, Summary national conference

Artifacts Formulation & Realization: Matsui's Matrix Method, Riccati Equation and Enterprise Robot
MATSUI Masayuki; Nobuaki Ishii
Aug. 2017, International Conference on Production Research 2017, Peer-reviwed, Summary international conference

企業ロボットの開発：自働経営管理とアルキメデス(分散)対ソクラテス(集中)方式
松井正之; 中島健一; 高野倉雅人; 林憲玉; 石井信明; 山田哲男
May 2016, 日本経営工学会予稿集, Japanese, Summary national conference

A Researcher's Essays : Student age vs. Recent-3
Matsui Masayuki
随想, 神奈川大学工学研究所, Nov. 2015, 神奈川大学工学研究所所報, 38, 105-107, Japanese, 0387-0324, 120005853835, AN00043601

Management Tutorials on Demand-to-Supply and Economic System(4)Management Issues on ERP/SCM, Economics System and GDP
松井 正之
日本設備管理学会, Feb. 2015, 日本設備管理学会誌, 26, 4, 121-128, Japanese, 0915-5023, 40020384522, AN10544501

Assignment Optimization Rules under the Limited-Cycle Model with Multiple Periods -When Untrained Worker in Minor-
P. Song; X. Kong; H. Yamamoto; J. Sun; M. Matsui
2015, International Symposium on Scheduling 2015, Kobe, Japan

Development of Factory Science: Duality and Balancing of the Job Shop (FS) vs. Conveyor System (OE) by Matsui's Flow Approach
M. Matsui
2015, International Symposium on Scheduling 2015, Kobe, Japan

The 3M&I-variety: Body-approach, Enterprise-particle and Balancing
MATSUI Masayuki
総説, 神奈川大学工学研究所, Nov. 2014, 神奈川大学工学研究所所報, 37, 36-43, Japanese, Introduction research institution, 0387-0324, 120005851729, AN00043601

Management Tutorials Demand to Supply and Economic System(3)Product/Enterprise Strategy Method and Matsui's Matrix Equation
松井 正之
日本設備管理学会, Oct. 2014, 日本設備管理学会誌, 26, 3, 100-105, Japanese, 0915-5023, 40020243727, AN10544501

Management Tutorials Demand-to-Supply and Economic System(2)Operations (Progressive) Management for Demand-to-Supply System
松井 正之
日本設備管理学会, Jul. 2014, 日本設備管理学会誌, 26, 2, 56-61, Japanese, 0915-5023, 40020180338, AN10544501

Management Tutorials on Demand-to-Syupply and Economic System(1)Fundamental Demand-to-Supply System and Planning
松井 正之
日本設備管理学会, Apr. 2014, 日本設備管理学会誌, 26, 1, 15-20, Japanese, 0915-5023, 40020084942, AN10544501

A Study on Rules of These Untrained Worker's Assignment Optimization under the Limited-Cycle Model with Multiple Periods
P. Song; H. Yamamoto; X. Kong; J. Sun; M. Matsui
2014, 1st East Asia Workshop on Industrial Engineering, Hiroshima University, Higashi-Hiroshima, Japan

A Lot size Based Collaborative Demand-to-Supply Management System for Make-to-Order Environment
N. Ishii; K. Sakashita; T. Yamada; M. Ohba; M. Matsui
2014, APLEMS 2014, Jeju, Korea

Numerical Analysis of Three Rookies Assignment Optimization in Limited-Cycle Model with Multiple Periods -the Case of Erlang Distribution
P. Song; X. Kong; H. Yamamoto; M. Matsui
2014, APLEMS 2014, Jeju, Korea

Paired Property Analysis for Optimal Worker Assignment -Worker Efficiency vs. Task-
X. Kong; H. Yamamoto; P. Song; J. Sun; M. Matsui
2014, APLEMS 2014, Jeju, Korea

A Study of Optimal Worker Assignment with Three Rookies under a Limited-Cycle Problem with Multiple Periods
P. Song; X. Kong; J. Sun; H. Yamamoto; M. Matsui
2014, International Conference on Industrial Management, Chengdu, China

Optimal Worker Assignment in Limited-Cycled Model with Risk among Multiple Periods
P. Song; X. Kong; H. Yamamoto; J. Sun; M. Matsui
2014, 6th Asia-Pacific international Symposium on Advanced Reliability and Maintenance Modeling, Sapporo, Japan

Optimal Management of Energy Storage based on Reinforcement Learning
J. Liu; H. Tang; M. Matsui; M. Takanokura
2014, 33rd Chinese Control Conference, Nanjing, China

Optimal Worker Assignment in Limited-Cycled Model Multiple Periods -Considering Continuous Delay as Risk-
X. Kong; H .Yamamoto; P. Song; J. Sun; M. Matsui
2014, 6th Asia-Pacific international Symposium on Advanced Reliability and Maintenance Modeling, Sapporo, Japan

Energy Management with Battery System for Smart City
M. Takanokura; M. Matsui; H. Tang
2014, 33th Chinese Control Conference, Nanjing, China

A Chameleon's Criteria and Medium Cntrol in Efficiency vs. Muda
MATSUI Masayuki
Dec. 2013, Scientifi Reports of Research Institute for Engineering, Kanagawa University, 36, 40-45, Japanese, Introduction research institution

Lean manufacturing and logistics management for sustainability
Nakashima Kenichi; Matsumaru Masanobu; Matsui Masayuki
共同研究, 神奈川大学工学研究所, Nov. 2013, 神奈川大学工学研究所所報, 36, 70-76, Japanese, 0387-0324, 120005838676, AN00043601

A Study on Optimal Worker Allocation with Competitive Clever Efficiency in Limited-Cycle Multiple Periods
X. Kong; J. Sun; H. Yamamoto; M. Matsui
2013, 9th International Conference on Optimization Techniques and Application, Taipei, Taiwan

Optimal Worker Allocation Considering Operation Skill on Different Task in Limited-Cycle Multiple Periods
X. Kong; J. Sun; H. Yamamoto; M. Matsui
2013, Asian Conference of Management Science & Applications, Kumming, China

A Study of Optimal Worker Allocation Focusing Efficiency vs. Task
X. Kong; J. Sun; H. Yamamoto; M. Matsui
2013, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference, Cebu, Philippines

Worker Allocation Optimization of Two Special Workers with Random Variable Target Time in Limited-Cycle Multiple Periods
X. Kong; H. Yamamoto; J. Sun; M. Matsui
2013, International Symposium on Scheduling 2013, Tokyo

Lean manufacturing management based on Quality/Environment ISO and TQM activities
Nakashima Kenichi; Matsumaru Masanobu; Matsui Masayuki
共同研究, 神奈川大学工学研究所, Nov. 2012, 神奈川大学工学研究所所報, 35, 56-65, Japanese, 0387-0324, 120005838657, AN00043601

Case Study of Generalized Material Flow Cost Accounting in Consideration of a Rate of Utilization
M. Ohba; M. Matsui; N. Ishii; T. Yamada
2012, The International Symposium on Production and Supply Chain Management, Lao PDR

Property of Worker Allocation Optimization with Two Professional Workers in Limited-Cycle Multiple Periods
X. Kong; J. Sun; H. Yamamoto; M. Matsui
2012, 2012 IEEE International Conference on Industrial Engineering, Hong Kong, China

A Mathematical Analysis on Flexible Switch Strategy in the Limited-Cycle with Multiple Periods
J. Sun; X. Kong; H. Yamamoto; M. Matsui
2012, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference, Phuket, Thailand

A Sandwich Theory and Real-Time Logic for Enterprise-Organizational Behavior
M. Matsui
2012, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference, Phuket, Thailand

A Study on the Target Processing Time of Worker Allocation Optimization Problem in Limited-Cycle Multiple Periods
X. Kong; J. Sun; H. Yamamoto; M. Matsui
2012, Asian Conference of Management Science & Applications, Jiuzhaigou-Chengdu, Sichuan, China

A Mathematical Analysis on Flexible Switching Strategy in the Limited-Cycle with Multiple Periods
J. Sun; X. Kong; H. Yamamoto; M. Matsui
2012, Asian Conference of Management Science & Applications, Jiuzhaigou-Chengdu, Sichuan, China

Two Quicker Workers' Optimal Assignment under a Limited-Cycle Problem with Multiple Periods
X. Kong; J. Sun; H. Yamamoto; M. Matsui
2012, 11th International Conference on Industrial Management, Tokyo, Japan

A Xbar-Chart Economics Model for Supplier Quality Risk Management
J. Sun; M. Matsui
2012, International Symposium on Reliability Engineering and Risk management, Yokohama, Japan

A Study of Optimal Arrangement in a Reset Limited-cycle Problem with Multiple PeriodsーWith Fewer Special Workerー
H. Yamamoto, J. Sun, M. Matsui, X. Kong
各期間において,制約された対象(例えば目標時間が存在する加工時間)の存在と,それに伴うリスクの発生を考え,そのような対象とリスクが多期間にわたり反復的(すなわち,サイクリック)に発生する状況を考える.本論文では,そのような状況においてリスクを最小にする問題(多期間制約サイクル問題)に関する最適配置問題について考察する.最初に,リセット多期間制約サイクル問題モデルの下で,最適配置を理論的に導き出すための一歩として,作業者が2種類居る場合に着目し,特殊作業者が1人居る場合の最適配置法則(定理)を提案する.次に,最適配置が一意に決定できない場合があるため,加工時間を指数分布と仮定した場合について,数値実験により最適配置を導出する.In today's society, there is extremely keen competition among manufacturing enterprises. Under such circumstances, it is vital for these enterprises to meet the delivery date deadlines. Under uncertain conditions, the result or efficiency of a period is often controlled not only by the risks of this period, but also by the risks generated beforehand. This kind of problem is called the limited-cycle problem with multiple periods. In this research, the issue of minimum expected risk in a certain period will be discussed, assuming that risk appears in multiple periods repeatedly. This paper considers the rules for an optimal arrangement with minimum total expected risk in a limited-cycle scheduling problem with multiple periods. Firstly, we consider the situation involving two kinds of workers who have different processing efficiencies. In this situation, we propose the properties of optimal arrangement where there is one special worker who has special processing efficiency. Secondly, the properties are proven mathematically. Finally, we reveal the unknown part through numerical experiments. This paper is significant as one step to derive the optimal arrangement theoretically., Dec. 2011, Journal of Japan Industrial Management Association, 62, 5, 239-246, Japanese, 1342-2618, 120005325371, AN10561806

An Outline on Matsui's Equation and its Circumference
MATSUI Masayuki
総説, 神奈川大学工学研究所, Dec. 2011, Scientific Reports of Research Instiute for Engineering, Kanagawa University, 34, 2-5, Japanese, Introduction research institution, 0387-0324, 40019165952, AN00043601

2-D-10 複数センターモデルにおける統合最適化と楕円理論について : 直並列Kセンターモデルの利益バランシング考察(2)(生産管理)
飯塚 裕之; 松井 正之
公益社団法人日本オペレーションズ・リサーチ学会, 17 Mar. 2011, 日本オペレーションズ・リサーチ学会春季研究発表会アブストラクト集, 2011, 204-205, Japanese, 110009359074, AN00351206

リアルタイム経営と流動面管理法開発
2011, 横幹技術協議会、横幹連合, 講演3

Development of ERP Education Program for Business Process Re-engineering Project
J. Sun; K. Tamaki; M. Kakehi; I. Watanabe, N. Ishii, M. Matsui, I. Koshijima
In global competition, a lot of enterprises try to use the ERP (Enterprise Resource Planning) package to improve achievement by business reform. However, although there are a lot of cases of achievement improvement and the customer satisfaction improvement, the failing case is not few. The failing reason is various, and one of the main causes is that ERP is not able to be used well on the production site. Therefore, the ERP education is necessary for making the ERP introduction succeed. In this background, the project of ERP education system is started by research center for e-learning professional competency of Aoyama Gakuin university research institute, which also is a joint research among NTT data systems corporation and ORACLE Japan corporation. This paper reports the result of the research., International Association of P2M, 2011, Journal of International Association of Project & Program Management, 5, 2, 63-73, Japanese, Peer-reviwed, 110008607642

Optimal Worker Assignment with Two Special Workers in Limited-Cycle Multiple Periods
X. Kong; J. Sun; H. Yamamoto; M. Matsui
2011, Asian Conference of Management Science & Applications, Sanya, China

Development of Progressive Inventory Method toward Real Time Age
M. Matsui
2011, Asian Conference of Management Science & Applications, Sanya, China

Optimal Switching Frequency in Limited-Cycle with Multiple Periods
J. Sun; H. Yamamoto; M. Matsui; X. Kong
2011, 12th Asia Pacific Industrial Engineering and Management System Conference, Beijing, China

A Numerical Research for Two Special Workers' Optimal Assignment in Two Kinds of Workers under a Limited-Cycle Problem with Multiple Periods
X. Kong; J. Sun; H. Yamamoto; M. Matsui
2011, 12th Asia Pacific Industrial Engineering and Management System Conference, Beijing, China

Economic (re-)Balancing Problem: A Visualization of Invisible Hand and Ellipse Theory for Multi-Center
M. Matsui
2011, Proceedings of 21th Asia Pacific Industrial Engineering & Management Systems

Two Special Workers Optimal Assignment with Two Kind of Workers under a Limited Cycle Problem with Multiple Periods
X. Kong; J. Sun; H. Yamamoto; M. Matsui
2011, Proceedings of 21th Asia Pacific Industrial Engineering & Management Systems

Analysis of Optimal Switching for Limited Cycle Problem with Multiple Periods
J. Sum; H. Yamamoto; M. Matsui; Z. Man
2011, Proceedings of 21th Asia Pacific Industrial Engineering & Management Systems

A study on Limited-Cycle Scheduling Problem with Multiple Periods
Hisashi Yamamoto; Jing Sun; Masayuki Matsui
This paper considers the optimal arrangement to minimize the total expected risk on limited-cycle scheduling problem with multiple periods. In this paper, first, the multi period problem is systematically classified and modeled. Next, a recursive formula for the total expected risk is presented, and an algorithm for optimal assignments in limited-cycle problems with multiple periods is proposed based on the branch and bound method. In addition, the effectiveness of the proposed algorithm is shown by investigating the calculation time of the computer. Finally, the optimal assignments are studied by numerical experiments and the property useful for the design of a production seat system is found. (C) 2010 Elsevier Ltd. All rights reserved., PERGAMON-ELSEVIER SCIENCE LTD, Nov. 2010, COMPUTERS & INDUSTRIAL ENGINEERING, 59, 4, 675-681, English, Peer-reviwed, 0360-8352, 80021430368, WOS:000284747000022

直並列Kセンターモデルの利益バランシング考察
2010, 日本オペレーションズ・リサーチ学会アブストラクト集, 142-143

流動数管理法における複数期リードタイム対応のロジック開発
松井 正之; 新屋 篤志; 新村 省二; 加藤 雅樹; 山田 祐通
公益社団法人日本オペレーションズ・リサーチ学会, 2010, 日本オぺレーションズ・リサーチ学会アブストラクト集, 2010, 148-149, Japanese, 110007708224, AN00351206

業務効率向上のためのERP実践型人材コンピテンシ構築及び教育システムの開発
2010, 国際プロジェクト＆プログラムマネジメント学会春季研究発表大会予稿集, 36-44

リセット多期間制約サイクル問題における最適配置法則に関する研究―特殊加工率を有する加工者が少人数の場合
2010, 日本経営工学会春季大会予稿集, 14-15

業務改革プロジェクトのためのERP教育プログラムの開発
2010, 国際プロジェクト＆プログラムマネジメント学会秋季研究発表会予稿集, 8-9

ロットサイズと供給戦略を考慮した需給マネジメントに関する基礎的考察
2010, 日本経営工学会秋季研究大会予稿集, 144-145

リセット多期間制約サイクル問題における最適配置法則に関する研究―２人の特殊作業者が居る場合
2010, 日本経営工学会秋季研究大会予稿集, 250-251

Application of On-Demand Inventory Control Software to Fast-food chain
H. Fujikawa; M. Matsui
2010, Proceedings of 16th International Symposium on Inventories, CD-ROM

General Formulas and 2-Level Balancing for Class of Conveyor-Serviced Production Network
M. Matsui
2010, Proceedings of 11th Asia Pacific Industrial Engineering & Management Systems, CD-ROM

Introductory Traffic Accounting Practice for Advanced Management
S. Marakuni; M. Matsui; N. Ishii
2010, Proceedings of 11th Asia Pacific Industrial Engineering & Management Systems, CD-ROM

A Study of an Optimal Arrangement of a Processing System with two kinds of Workers in a Limited-Cycle Problem with Multiple periods
X. Kong; J. Sun; H. Yamamoto; M. Matsui
2010, Proceedings of 11th Asia Pacific Industrial Engineering & Management Systems, CD-ROM

Optimal Switching Period in Limited-Cycle Problem with Multiple Periods
J. Sun; H. Yamamoto; M. Matsui; Z. Man
2010, Proceedings of 11th Asia Pacific Industrial Engineering & Management Systems

Toward the Integration of Intelligence for HigherManagement
MATSUI Masayuki; SUZUKI Hisatoshi; TSUBAKI Hiroe; OHBA Masaaki; IROHARA Takashi
This paper attempts to address our project toward higher management by the integrationof intelligence. There are a few pilot plans for our "Oukan" project beginning at 2010. This industryuniversitycooperation would produce the innovative/effectivemanagement simulator/planner for enterprisemanagers in the near future., Transdisciplinary Federation of Science and Technology, 2010, Oukan (Journal of Transdisciplinary Federation of Science and Technology), 4, 1, 2-5, Japanese, Invited, Introduction scientific journal, 1881-7610, 130005138267, AA12434320

Retirement Address by the 29th President
MATSUI Masayuki
15 Aug. 2009, 経営システム = Management systems : a journal of Japan Industrial Management Association, 19, 3, 105-105, Japanese, 0917-6241, 10026275457, AN10555665

総合化PLM指向の事業創造プロセスのモデル化と管理方法の最終年度報告書 : TF21事業創造戦略プロフェッショナル研究部会
玉木 欽也; 渡辺 一衛; 松井 正之; 越島 一郎; 高橋 勝彦; 八木 英一郎; 石井 信明; 森川 克己; 小酒井 正和; 荒川 雅裕; 山田 哲男; 梅田 富雄; 筧 宗徳; 佐々木 典夫; 野尻 寛; 孫 晶
青山学院大学, Mar. 2009, 青山学院大学総合研究所eラーニング人材育成研究センター(eLPCO) 研究叢書, 4, 1, 7-130, Japanese, 1880-9766, 110007542470, AA12211687

需給協働マネジメントに関する研究
2009, TF21事業創造戦略プロフェショナル研究部会

需給マネジメント法とそのポストERP/SCM用ツール
2009, SCM時代の製造マネジメント研究部会(3学会合同部会）

新企業マネジメント法：利益最大化、ペア戦略マップからポストBSCへ
2009, 横断型基幹科学技術研究団体連合(横幹連合） 横断型基幹科学技術推進協議会(横幹技術協議会）

病院モデリングを利用したマネジメント研究―二次医療圏における病院ネットワークモデルを用いたマネジメント的考察
2009, 日本経営工学会春季大会予公稿集, 4-5

高度マネジメントに向けたトラフィック会計の実用化研究と事例
2009, 日本経営工学会春季大会予稿集, 48-49

技術移転・事業化におけるコーディネート機能の分析―産官学連携における技術移転・事業化乃最適マネジメントに関する研究(第3報）
2009, 日本経営工学会春季大会予稿集, 98-99

産学官連携における技術移転の成功例についての数量化分析―産学官連携における技術移転・事業化の最適マネジメントに関する研究 (第4報）
2009, 日本経営工学会春季大会予稿集, 100-101

スケジューラを活用した生産管理ERPシステムの導入プロジェクトマネジメントに関する大学院授業設計
2009, スケジューリング・シンポジウム2009講演論文集, 95-100

リセット多期間制約サイクル問題における最適配置法則に関する研究―特殊な作業者が２人の場合
2009, 日本経営工学会秋季研究大会予稿集, 84-85

ノンリセット多期間制約サイクルモデルにおける最適切換問題に関する研究―基準時間により加工スピードを切換える場合
2009, 日本経営工学会秋季研究大会予稿集, 86-87

製品×企業戦略とサステイナビリティについて―ペア戦略マップ理論の展開に関する研究(第２報）
2009, 日本経営工学会秋季研究大会予稿集, 148-149

需給マネジメントにおけるロットサイズを考慮した受注戦略に関する基礎的考察
2009, 日本経営工学会秋季研究大会予稿集, 156-157

コーディネート機能貢献度の包絡分析(DEA)―産学官連携による技術移転・事業化の最適マネジメントに関する研究(第５報）
2009, 日本経営工学会秋季研究大会予稿集, 174-175

需要が一定の場合における内外作分析について―高度マネジメントに向けたトラフィック会計の実用化研究と事例(第２報）
2009, 日本経営工学会秋季研究大会予稿集, 184-185

マテリアルフローコスト会計との対応と一般化について―高度マネジメントに向けたトラフィック会計の実用化研究と事例(第３報）
2009, 日本経営工学会秋季研究大会予稿集, 186-187

新企業マネジメントフレームワークの試論
2009, 横断型基幹科学技術研究団体連合, 1N1-4

ハイブリッド生産のためのERP大学院授業システムの開発
2009, 横断型基幹科学技術研究団体連合, 1N1-3

Stochastic Assembly Line Planner with Strategy (SALPS)
T. Yuuki; A. Nishimoto; M. Matsui; N. Utsugi; T. Yamada
2009, Proceeding of 20th International Conference on Production Research, 68

A Study of Optimal Switching Point on Limited-Cycle Problem with Multiple Periods
J. Sun; H. Yamamoto; M. Matsui; T. Oishi
2009, Proceeding of International Conference on Production Research, 70

A Look-Ahead Method for On-Demand Supply by Progressive Control Chart
M. Matsui; H. Ichimaru; H. Fujikawa
2009, Proceeding of International Conference on Production Research, 144

A Queueing Network Approach into an Hospital Network Model
D. Kobayashi; K. Sakata; M. Matsui
2009, Proceedings of 20th International Conference on Production Research, 99

Solution Model of P-Chart for SCM Considered the Due Time and Quality Risks
J. Sun; M. Matsui
2009, Proceedings of International Workshop on Institutional View of SCM (ISCM), 161-169

A Design of Graduate Education System of ERP Project Management
J. Sun; K. Tamaki; M. Kakehi; I. Watanabe; N. Ishii; M. Matsui
2009, Proceedings of Asia Pacific Industrial Engineering & Management Systems Conference 2009, 260

経営工学100周期にむけて
松井正之
2009, 経営システム誌, 19, 3, 108-112

経営工学１００周期にむけて
2008, 日本経営工学会

スケジューラーを用いた需給マネジメント学習支援システムの開発
2008, 日本経営工学会春季大会予稿集, 10-11

品切れを嫌う商品のオンデマンド発注・在庫管理システム―オンデマンド時代のSCMに関する研究(第６報）
2008, 日本経営工学会春季大会予稿集, 146-147

ノンリセットモデルの場合―多期間制約サイクル問題における最適切換方法に関する研究(第２報）
2008, 日本経営工学会春季大会予稿集, 148-149

ペア戦略マップ理論の展開に関する研究
2008, 日本経営工学会春季大会予稿集, 218-219

SCMにおけるフィードバック品質情報を管理するための管理図モデル
2008, 日本経営工学会秋季研究大会予稿集, 42-43

技術移転・事業化の成功要因とコーディネート機能の担い手―産学連携による技術移転の戦略的マネジメントの研究(第２報）
2008, 日本経営工学会秋季研究大会予稿集, 66-67

病院管理モデルを用いた一般病床における最適な病床数について―病院管理における患者動向シミュレーション研究
2008, 日本経営工学会秋季研究大会予稿集, 70-71

基準工程及び時間より加工スピードを切換る場合―ノンリセット多期間制約サイクルモデルにおける最適切換問題に関する研究
2008, 日本経営工学会秋季研究大会予稿集, 296-297

加工率が2種類の場合―多期間制約サイクル問題における最適配置法則に関する考察
渡部訓祥
2008, 日本経営工学会秋季研究大会予稿集, 298-299, 10030093031

A Theory and Tools for Collaborative Deamnd-to-Supply management in the SCM Age
A. Hayashi; N. Ishii; M .Matsui
2008, Proceeding of the 9th Asia Pacific Industrial Engineering & Management Systems Conference, 40

A Study on Limited-Cycle Problem with Multiple Periods
J. Sun; H. Yamamoto; M. Matsui; K. Watanabe
2008, Asia Pacific Industrial Engineering and Management Society(APIEMS), 341, English, Introduction international proceedings

経営工学100周期を迎えて
松井正之
日刊工業新聞社, 2008, 工場管理, 54, 12, 106-109, Japanese, Invited, Technical report, 0023-2777, 40016203813, AN00082603

Inaugural Address of the 29th President
MATSUI Masayuki
15 Jun. 2007, 経営システム = Management systems : a journal of Japan Industrial Management Association, 17, 2, 97-97, Japanese, 0917-6241, 10019568341, AN10555665

サステイナブル企業支援のための需給マネジメントと協同的生産管理 (統合化PLM指向の事業創造プロセス研究 : TF21事業創造戦略プロフェッショナル研究部会)
松井 正之; 石井 信明; 高橋 勝彦; 森川 克己
Mar. 2007, 青山学院大学総合研究所eラーニング人材育成研究センター(eLPCO) 研究叢書, 2, 1, 25-35, 1880-9766, 120005432620, AA12211687

経営工学の100年、新・研究法、戦略マップと体系化へ
松井正之
2007, 日本経営工学会中国四国支部, 10026275462

ポスト・経営工学100年はどこへ向かうか・目指すか
松井正之
2007, 日本経営工学会, 1, 10026275463

直列対並列サプライチェーンのWin-Winバランシング問題
2007, 日本オペレーションズリサーチ学会, 配布資料

多期間制約サイクル問題における最適切換方法に関する研究
2007, 日本経営工学会, 162-163

需給プランナー(Ver.3)と戦略的運用法について―需給マネジメントのための戦略的プランナーの開発研究(第4報）
2007, 日本経営工学会, 166-167

あるフランチャイズチェーンでの生産・在庫コスト最小化モデル―オンデマンド時代のSCMに関する研究(第４報）
2007, 日本経営工学会, 170-171

ロジスティクス指向供給システム計画問題について
2007, 日本経営工学会春季大会予稿集, 80-81

搬送システムにおけるAGVの最適割当て問題の解法
2007, 日本経営工学会, 124-125

生産遅れを伴う注文生産における新部品発注ロジックのの提案―オンデマンド時代のSCMに関する研究(第5報）
2007, 日本経営工学会, 224-225

SCMにおけるサプライヤーの品質情報管理のための管理図モデルの研究
2007, 経営情報学会, 146-149

Enterprise Modeling and Integration: A Stochastic Management Approach
M. Matsui
2007, Proceeding of 19th International Conference on Production Research, Session Mo1.3

A control chart design for supplier in view of quality, due time and cost
J. Sun; M. Matsui
This paper presents a design of the x̄ control chart in view of quality, due time and cost to improve customer satisfaction of supplier. Recently, due to ever increasing competition in supplier markets, it is demanded to offer the low-cost and high quality product in short due time. Therefore, studying the balance of quality and the due time and cost has become a new problem to supplier. In short run process, the time of treating an assignable cause (ACT time) is an important effect to the total cost and due time. To resolve the above problem, in this research, first a design of the x̄ control chart is developed in which the ACT time was considered. Then, from an economic viewpoint, the mathematical formulations which correspond to the design are shown. Finally, by numerically consideration, the balance of quality (control limits width) and due time and the total expectation cost is discussed, and the new relations between the due time, ACT time and the total expectation cost are found. © 2007 IEEE., 2007, IEEM 2007: 2007 IEEE International Conference on Industrial Engineering and Engineering Management, 1639-1643, English, 40649108107

ERP/SCM時代における生産スケジューリングのあり方と大学での教育的試み
2007, 経営システム誌, 17, 1

On-Demand Inventory Management System at MTO : A Parts-Order Control Case in Accompanying with Production Delay
MATSUI Masayuki; FUJIKAWA Hiroaki
日本経営工学会, 2007, Communications of JIMA, 17, 3, 250-253, Japanese, 0917-6241, 10019838115, AN10555665

需給開発マネジメントと協働的生産管理 (統合化PLM指向の事業創造プロセス研究 : TF21事業創造戦略プロフェッショナル研究部会)
松井 正之; 高橋 勝彦; 森川 克己
Mar. 2006, 青山学院大学総合研究所eラーニング人材育成研究センター(eLPCO) 研究叢書, 1, 1, 21-32, 1880-9766, 120005432611, AA12211687

ERP/SCM時代における生産スケジューリングのあり方と大学での教育的試み
2006, スケジューリング学会

Parallel SCM: Balancing of Make-or-Buy and Retailer Types
2006, SIMOT(The 21th COE Program, Tokyo Institute of Technology) and JIMA(Japan Industrial Management Association), Plenary Sessin,16

An Analysis of Disassembly Systems with Riverse Blocking
2006, SIMOT(The 21th COE Program, Tokyo Institute of Technology) and JIMA(Japan Industrial Management Association), 21

受注ロット生産SCMにおける部品発注計画法の研究―オンデマンド時代のSCMに関する研究(第３報）
真柄博幸
2006, 日本経営工学会春季大会予稿集, 50-51, 10019838120

２連鎖SCMによる統合バランシングに関する基礎的考察
2006, 日本経営工学会春季大会予稿集, 100-101

多期間制約サイクル問題における最適配置の解法及び法則に関する研究
2006, 日本経営工学会春季大会予稿集, 156-157

納期遅れぺナルティを考慮したXbar管理図の経済性モデル―リモートでの製造不良改善のため―
2006, 日本設備管理学会春季研究発表会論文集, 13-18

サステイナブル企業支援の体系的な事業創造戦略問題について
2006, 日本経営工学会秋季研究大会予稿集, 108-109

工場理学の発展：時間バランシングから価値バランシング理論へ
2006, 日本経営工学会秋季研究大会予稿集, 116-117

SCM Balancing 2-MGM Chains and Integral Optimization
M. Motohashi; M. Matsui
2006, INFORMS(Institute for Operations Research and the Management Sciences), 116, English, Introduction international proceedings

Progrssive-Curve-Based Control Method and SC Planner
H. Fujikawa; M. Matsui
2006, INFORMS International, 116

The CAPD Model of Xbar Chart with Tardiness Penalty for improving Supplier Quality
J. Sun; M. Tsubaki; M. Matsui
2006, Proceeding of 3rd IEEE International Conference on Management of Innovation and Technology (ICMIT2006), 802-806

Models of Control Chart wit Tardiness Penalty used in Short Due Time Processes
J. Sun, M. Tsubaki, Masayuki Matsui
2006, Proceeding of 11th Annual International Conference on Industrial Engineering―Theory, 648-653, English, Introduction international proceedings

戦略的MRPII/ERP/SCMのマネジメント問題―製販コラボレーションとペア戦略マップツール
2006, 経営システム誌, 16, 1, 43-46

SCM支援のオンデマンド在庫管理システム―需要予測の呪縛から解かれたら在庫が削減した―
2006, 経営システム誌, 16, 5, 305-309

Production Scheduling and University Education in ERP/SCM Era
2006

Parallel SCM: Balancing of Make-or-Buy and Retailer Types
2006, SIMOT(The 21th COE Program, Tokyo Institute of Technology) and JIMA(Japan Industrial Management Association), Plenary Sessin,16

An Analysis of Disassembly Systems with Riverse Blocking
2006, SIMOT(The 21th COE Program, Tokyo Institute of Technology) and JIMA(Japan Industrial Management Association), 21

Strategic Selection of Economics Assembly Systems under Viable Demands
T. Yamada; S. Kakefuda; M. Matsui
2006, INFORMS International

ある卸売会社における流動数管理図法の展開―オンデマンド時代のSCMに関する研究（第２報）
2005, 日本経営工学会, 52-53

P管理図のPDCA経済モデルにおける数理
2005, 日本経営工学会, 104-105

(d，α）戦略図法におけるプランナーの再構築と運用法について―需給マネジメントのための戦略プランナーの開発研究（第２報）
2005, 日本経営工学会, 244-245

不良品リスク削減におけるP管理図のCAPDモデルの提案
2005, 日本設備管理学会, 13-18

設計要因をもつ確率的混合ラインの最適化
2005, 日本設備管理学会, 63-68

プロセス企業における需給開発マネジメントについて―需給マネジメントのための需給プランナーの開発研究（第３報）
2005, 日本経営工学会, 216-217

A Design Study of Stochastic Mixed Lines with Control Factors
T. Yamada; K. Abe; M. Matsui
2005, Proceeding of 18th International Conference on Production Research, 154

A Economic Considerations in CAPD Model of P Control Chart for Quality Management
J. Sun; M. Tsubaki; M. Matsui
2005, Proceeding of International Conference on Quality, VI-10, English, Introduction international proceedings

Key Issues on Implementing Cooperative Mobile Robot Technologies for Port Automation
S. Kumar, L. Vlacic, T. Yamada, M. Matsui, A. Ming
2005, CIRAS 2005, CAS1-3 (1058), English, Introduction international proceedings

セル対コンベヤ生産の比較を中心に―効率的組立システムの比較に関する一研究（第２報）
掛札智美
2004, 日本経営工学会春季大会予稿集, 38-39, 10014660276

多期間サイクルモデルにおける最適配置問題の解法―制約サイクル問題に関する理論的研究（第３報）
2004, 日本経営工学会春季大会予稿集, 64-65

サプライチェーンにおける在庫変動を流動数図法により最小化する管理手法の開発
松井正之
2004, 日本経営工学会春季大会予稿集, 92-93, 10014660286

X管理図型CAPDモデルの経済性における最適なサンプリング間隔ｖに関する考察
2004, 日本経営工学会春季大会予稿集, 122-123

セントラルサーバモデルにおける最早対OEルーチングの評価
2004, 日本経営工学会春季大会予稿集, 164-165

分解ブロッキング待ち行列の性能評価―分解生産システムと設計課題について（第３報）
2004, 日本経営工学会春季大会予稿集, 166-167

需給マネジメントのための戦略プランナーの開発研究
高橋義久
2004, 日本経営工学会春季大会予稿集, 194-195, 10014660284

A Design Problem of Mixed Model Assembly Line Systems using Adam-Eve GA
2004, 日本設備管理学会春季研究発表大会論文集, 101-106

工科系における実証実験と有効性評価―「需給マネジメント演習」のeラーニング法の開発について（第２報）
2004, 日本経営工学会秋季研究大会予稿集, 38-39

混合ライン対セル生産方式の比較に関する一研究
長友寛
2004, 日本経営工学会秋季研究大会予稿集, 144-145, 10026017559

制約サイクルをもつ確率モデルにおける最適切換問題
2004, 日本経営工学会秋季研究大会予稿集, 326-327

A Management Game Model of Service System Type
M Matsui; A Saito
There are the sales and production centers in enterprises. Recently, the 2-center model for enterprises is developed to a management game model (MGM) in Matsui (2002), and the ellipse theory with pair-pole is found on the pair-matrix table. However, the discussion is somewhat limited to manufacturing system type. This paper discusses the concept of service systems, formulates a MGM model of service system type, and develops the MGM theory.
First, the service type MGM is defined, and the behaviors of objective function are considered. Next, the ellipse theory is ascertained on the pair-matrix table, and the usage is discussed under a strategic goal. In addition, the service vs. manufacturing system type is noted., INTERNATIONAL ACADEMIC PUBLISHERS LTD, 2004, SERVICE SYSTEMS AND SERVICE MANAGEMENT - PROCEEDINGS OF ICSSSM '04, VOLS 1 AND 2, 1, 50-53, English, WOS:000223847800011

The Optimal Control Problem of Associated Make-to-Order Supply Chian Systems
M. Matsui; A. Saito
2004, Proceeding of International Conference of Logistics Systems (ICLS 2004), 40-47

An Integral Balancing Model in Marketing-Manufacturing SCM
M. Matsui; J. Komazaki; S. Suzuki
2004, Proceeding of International Conference of Logistics Systems (ICLS 2004), 279-283

A Queuing Model of Disassembly Systems with New Blocking
2004, 2, 778-785

Management Game Theory: Manufacturing vs. Service Enterprise TYpe
M. Matsui
Lead, 2004, 5th Asia-Pacific Industrial and Management Systems Conference and 7th Asia-Pacific Division Meeting of IFPR, 190, English, Introduction international proceedings

MGM-Modeling and Balancing Problem in Supply Chain Management
M. Matsui
2004, Proceedings of 5th Asia-Pacific Industrial Engineering and Management Systems Conference and 7th Asia-Pacific Division Meeting of IFPR, 189, 10026459779

ペア戦略マップの創案とその周辺
2004, 経営システム, 14, 3, 142-145

A Design Problem of Mixed Model Assembly Line Systems using Adam-Eve GA
2004, Spring Meeting of the Society of Plant Engineers Japan, 101-106

A Queuing Model of Disassembly Systems with New Blocking
2004, 2, 778-785

Pair-Strategic Map and Its Periphery
2004, Mnagement Systems, 14, 3, 142-145

A Unified Approach to Stochastic Assembly Line Systems : Simultaneous Decision of Cycle Time and Buffers
T. Yamada; M. Matsui; H. Yamamoto
2004, Proceeding of 8th International Conference on Manufacturing and Management, 2778-2785

需給マネジメント
2003, 青山学院大学AMLIIプロジェクト

組立ラインシステム設計とSCM問題
2003, 日本OR学会「統合オペレーション」プロジェクト、G３部会「リソースプランニング」報告書, 63-72

A General Theory of Demand and Supply Systems by Queueing Formulas
2003, 待ち行列シンポジウム「確率モデルとその応用」報文集、掛川, 130-133

サービス型マネジメント・ゲームモデルの研究
2003, 日本経営工学会春季大会予稿集, 2-3

管理図型品質管理PDCAサイクル問題の定式化について
2003, 日本経営工学会春季大会予稿集, 16-17

多期間サイクル問題の最適化―制約サイクル問題に関する理論的研究（第２報）
2003, 日本経営工学会春季大会予稿集, 22-23

セントラルサーバモデル問題におけるハイブリッドルーチング規則
2003, 日本経営工学会春季大会予稿集, 106-107

分解生産システムと設計課題について
2003, 日本経営工学会春季大会予稿集, 144-145

管理図型品質管理サイクルにおけるPDCAとCAPDの比較―制御内生産時間と制御外生産時間が独立の場合―
2003, 日本品質管理学会第７１回研究発表会要旨集, 227-230

BTO環境下での組立ラインシステムのGA最適化設計に関する研究
2003, 日本設備管理学会春季研究発表大会論文集, B27-30

「需給マネジメント」のゲーム的eラーニング法の開発
高橋義久
2003, 日本設備管理学会春季研究発表大会論文集, C9-14, 10015085066

「需給マネジメント」のためのツール：（N,α）戦略マップ
松井正之
2003, スケジューリング・シンポジウム２００３講演論文集, 72-77, 10015085068

分解ブロッキングの待ち行列モデル―分解生産システムと設計課題について（第２報）
2003, 日本経営工学会秋季研究大会予稿集, 198-199

MRPII（製造資源計画）の概要
2003, 工場管理, 49, 4, 72-75

A General Theory of Demand and Supply Systems by Queueing Formulas
2003, 130-133

A Game Approach to SCM: Modeling, Formulation and Integral Optimization
M. Matsui; S. Ichimura
2003, Proceeding of 17th International Conference on Production Research, 10026459782

A Cooperation/Collaboration Logic by Sharing Information in a ERP Model
J. Yamato; T. Yamada; M. Matsui; S. Y. Nof
2003, Proceeding of 17th International Conference on Production Research, 10018137103

A Design Problem of Assembly Line Systems using Genetic Algorithm under the BTO Environment
K. Abe, T. Yamada, M. Matsui,
2003, Proceeding of Asia Pacific Symposium on Intelligent and Evolutionary Systems: Technology and Applications

An Overview of MRP II (Manufacturing Resource Planning)
2003, Factory Management, 49, 4, 72-75

Performance evaluation of a flexible machining/assembly system and routing comparisons (vol 40, pg 1713, 2002)
JS Ma; M Matsui
TAYLOR & FRANCIS LTD, Sep. 2002, INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 40, 14, 3481-3481, English, Others, 0020-7543, WOS:000177981600014

ＳＣＭへのゲームアプローチ（２）：統合モデル問題と全体最適化ロジック
2002, 日本ＯＲ学会ＲＩＯ特設Ｇ４グループ研究会

待ち行列公式”Ｗ＝ＺＬ”とその周辺について
2002, 日本ＯＲ学会待ち行列研究部会

Parallel SCM: A Make-or-Buy Chain Model and Integral Optimization
2002, Workshop on Inventory Control and Production Planning & Management 2002, TIT

経営工学１００年とシステム・アプローチについて
2002, 日本経営工学会西関東支部研究会

経営工学１００年とシステム・アプローチについて
2002, 日本経営工学会西関東支部研究会

Parallel SCM : A Make-or-Buy Chain Model and Integral Optimization
MATSUI M.
Tokyo Institute of Technology, 2002, Workshop on Inventory Control and Production Planning & Management 2002, 6, 10026459785

2-A-1 CONCEPT OF MANAGEMENT SCHEDULER AND A SOFTWARE DEVELOPMENT :
Matsui Masayuki; Yamada Tetsuo; Nishioka Yasuyuki
Production scheduling problems have become more complex and strategic in manufacturing enterprises in recent years. Because of such complexities, managers usually use scheduling software to plan feasible schedules under the circumstances of production. Currently available scheduling software does not seem to have the functions of evaluating schedules sufficiently in view of management considering factors such as profit and lead time. To realize the necessary functions of such software, we connect scheduling software to management software, and present a concept of the Management Scheduler through a software development. Here, the Managerial APSTOMIZER is developed as software of the Management Scheduler by connecting the APSTOMIZER for scheduling to Matsui's patent software (named MAP-A1) for management. Fist, the concept of the management scheduler and the management by progressive figures are explained, and the system architecture is prepared. Next, the Managerial APSTOMIZER is introduced by connecting the APSTOMIZER to MAP-A1,and the operating procedure is developed. Finally, the execution of an example is done by using the software, and the merits of the software are shown by graphs, etc., 日本機械学会, 2002, Proceedings of International Symposium on Scheduling, 2002, 25-28, English, 110002483497, AA11901544

An Operational/Management Design Approach to Flexible Manufacturing Systems
2002, <待ち行列理論とその応用：未来への展望＞シンポジウム報文集, 76-84

トヨタ対デル型連鎖の全体最適化ロジック----ＳＣＭの統合モデリングと定式化について（第２報）
松井 正之; 市原 重直
公益社団法人日本オペレーションズ・リサーチ学会, 2002, 日本オペレーションズ・リサーチ学会春季アブストラクト集, 2002, 178-179, Japanese, 110003481400, AN00351206

ＯＥルーチングを用いたセントラルサーバ型待ち行列の利益最大化問題
川崎 栄一; 山下 英明; 松井 正之
公益社団法人日本オペレーションズ・リサーチ学会, 2002, 日本オペレーションズ・リサーチ学会春季アブストラクト集, 2002, 110-111, Japanese, 110003481367, AN00351206

SCMのトヨタ対デル型連鎖と全体最適化について
松井正之
2002, 日本経営工学会春季大会予稿集, 10-11, 80015410635

SCMのための安全在庫量の設定法に関する事例研究
2002, 日本経営工学会春季大会予稿集, 12-13

効率的組立システムの比較に関する一研究
2002, 日本経営工学会春季大会予稿集, 50-51

制約サイクル問題に関する理論的研究
2002, 日本経営工学会春季大会予稿集, 108-109

内外作を考慮した個別生産システムの２段階設計と全体最適化
2002, 日本経営工学会春季大会予稿集, 170-171

ライン長制約のある組立ラインシステムの最適設計に関する研究
2002, 日本設備管理学会春季研究発表大会論文集, B1-6

「需給マネジメント」のeラーニング
2002, 電気学会電子・情報・システム部門大会講演論文集, 49

時間価値効率の経営分解公式について―マネジメント・ゲームのモデリングに関する研究（第６報）
2002, 日本経営工学会秋季研究大会予稿集, 228-229

「需給マネジメント演習」のeラーニング法の開発について
高橋義久
2002, 日本経営工学会秋季研究大会予稿集, 222-223, 80015755251

A Strategic Management/Design of Flexible Manufacturing Systems
M. Matsui; Y. Wang
2002, Proceeding of 6th International Conference on Engineering Design and Automation, 10014660275

組立環境変化と効率システム
2002, 経営システム, 12, 2, 86-88

Parallel SCM: A Make-or-Buy Chain Model and Integral Optimization
2002, Workshop on Inventory Control and Production Planning & Management 2002, TIT

Parallel SCM: A Make-or-Buy Chain Model and Integral Optimization
2002, Workshop on Inventory Control and Production Planning & Management 2002, 6

Concept of Management Scheduler and a Software Development
Matsui Masayuki; Yamada Tetsuo; Nishioka Yasuyuki
Production scheduling problems have become more complex and strategic in manufacturing enterprises in recent years. Because of such complexities, managers usually use scheduling software to plan feasible schedules under the circumstances of production. Currently available scheduling software does not seem to have the functions of evaluating schedules sufficiently in view of management considering factors such as profit and lead time. To realize the necessary functions of such software, we connect scheduling software to management software, and present a concept of the Management Scheduler through a software development. Here, the Managerial APSTOMIZER is developed as software of the Management Scheduler by connecting the APSTOMIZER for scheduling to Matsui's patent software (named MAP-A1) for management. Fist, the concept of the management scheduler and the management by progressive figures are explained, and the system architecture is prepared. Next, the Managerial APSTOMIZER is introduced by connecting the APSTOMIZER to MAP-A1,and the operating procedure is developed. Finally, the execution of an example is done by using the software, and the merits of the software are shown by graphs, etc., 日本機械学会, 2002, Scheduling Society of Japan, 2002, 25-28, English, 110002483497, AA11901544

An Operational/Management Design Approach to Flexible Manufacturing Systems
2002, Proceedings of the Symposium on Queueing Theory and its Applications: Queueing Theory inthe 21st Century, 76-84

Environmental Changes and Efficient Systems in Assembly Works
2002, Management Systems, 12, 2, 86-88

Stochastic Management and Design of Manufacturing Systems: Job-Shop Type
2001, Invited Lecture，Free University，Amsterdam

CSPS Model: A Look-Ahead Control and Physical Theory
2001, 日本OR学会待ち行列研究部会，３回例会（156回部会），東工大

サプライチェーンの需給モデルと全体最適化
2001, ＣＩＭ研究会

Stochastic Management and Design of Manufacturing Systems: Job-Shop Type
2001, Invited Lecture，Free University，Amsterdam

組立ラインシステム設計とSCM問題
2001, 日本OR学会特別研究プロジェクト「統合オペレーション」G３研究グループ（リソースプランニング），第11回研究会

サプライチェーンの需給モデルと全体最適化
2001, ＣＩＭ研究会

時間価値効率の最大化とDEA定式化について ―マネジメント・ゲームのモデリングに関する研究（第５報）
2001, 日本経営工学会春季大会予稿集, 175-176

SCMの統合モデリングと定式化について
2001, 日本オペレーションズ・リサーチ学会春季アブストラクト集, 18-19

セントラルサーバ待ち行列におけるルーチング規則の一考察
2001, 日本オペレーションズ・リサーチ学会春季アブストラクト集, 218-219

SCM時代のマネジメント・シミュレータのモデルと構築例
2001, 日本経営工学会秋季研究大会予稿集, 14-15

A Unified Approach to Stochastic Assembly Line Systems : Simultaneous Decision of Cycle Time and Buffers
T. Yamada; M. Matsui
2001, Proceeding of 16th International Conference on Production Research, L4.4

Production and Inventory Management from Cumulative Curve Analysis Using Grey Theory
J. Usui; M. Kitaoka; M. Matsui
2001, Proceeding of 16th International Conference on Production Research, K6.2

An ARIS Approach for 2-Center Model of Sales and Production
T. Yamada; M. Matsui
2001, PRISM Symposium & Reunion on Integration, Networking, and Next Decade, 10

組立ラインシステム設計とSCM問題
2001, 日本OR学会特別研究プロジェクト「統合オペレーション」G３研究グループ（リソースプランニング），第11回研究会

SCM時代のための設備／CIM／人工物の効率、評価、保全理論
松井 正之
日本設備管理学会, 2001, 日本設備管理学会誌, 13, 2, 103-107, Japanese, 0915-5023, 40004841755, AN10544501

Cumulative Control Problems and Grey-Theoretic Model
Usuki Jun; Kitaoka Masatoshi; Matsui Masayuki
The University of Electro-Communications, 2001, Bulletin of the University of Electro-Communications, 14, 1, 13-20, Japanese, 0915-0935, 110000491075, AN10016842

Stochastic Management and Design of Manufacturing Systems: Job-Shop Type
2001, Invited Lecture，Free University，Amsterdam

CSPS Model: A Look-Ahead Control and Physical Theory
2001

Stochastic Management and Design of Manufacturing Systems: Job-Shop Type
2001, Invited Lecture，Free University，Amsterdam

A Queueing/Management Consideration on Japanese Production System
M. Matsui
2001, Proceeding of 16th International Conference on Production Research, G5.6

Efficiency, Evaluation and Maintenance Theory of Equipments/CIMs/Artifacts in SCM Era
2001, Journal of the Society of Plant Engineers Japan, 13, 2, 103-107

SCM時代のマネジメント問題とその定式化，ゲーム化について
2000, 招待講演（神奈川大学工学部）

利益と信頼性，相関ひと目で
2000, 日刊工業新聞１面

SCMへのゲームアプローチ：MGMとそれによる連鎖モデリング"
2000, 日本OR学会「統合オペレーション」特別研究プロジェクト，特G4研究グループ・第２回研究会，大阪大学

ペア行列ゲームとマネジメントへの応用について
2000, 第５回VALDESゲーム理論セミナー，東工大

SCM時代のマネジメント問題とその定式化
2000, マネジメントクラブ第３回例会講演，日本インダストリアル・エンジニアリング協会

Stochastic Management and Degign of Manufacturing System―生産／待ち行列研究の概観
2000, 「情報通信ネットワークの新しい性能評価法に関する総合的研究」シンポジウム報告集，仙台, 41-48

フレキシブル加工／組立システムの性能評価
2000, 「情報通信ネットワークの新しい性能評価法に関する総合的研究」シンポジウム報告集，仙台, 211-220

SCMへのゲームアプローチ：MGMとそれによる連鎖モデリング"
2000, 日本OR学会「統合オペレーション」特別研究プロジェクト，特G4研究グループ・第２回研究会，大阪大学

ペア行列ゲームとマネジメントへの応用について
2000, 第５回VALDESゲーム理論セミナー，東工大

組立ラインシステム（ALS）の場合―コンベヤ生産システムへのマネジメント設計アプローチの研究（第１報）
2000, 日本経営工学会春季大会予稿集, 162-163

フレキシブル組立システム（FAS）の場合―コンベヤ生産システムへのマネジメント設計アプローチの研究（第２報）
2000, 日本経営工学会春季大会予稿集, 164-165

新需給経済理論：対極姓，相対性，２レベル性
2000, 日本経営工学会秋季研究大会予稿集, 44-45

シュミレータモデルとその基礎的考察―連続型個別生産システムの２段階設計法に関する研究（第１報）
2000, 日本経営工学会秋季研究大会予稿集, 62-63

適用法とその頑健姓の事例研究―連続型個別生産システムの２段階設計法に関する研究（第２報）
2000, 日本経営工学会秋季研究大会予稿集, 198-199

都市部におけるオフィス分散立地に関する研究
2000, 日本経営工学会秋季研究大会予稿集, 76-77

A Management Design Approach to Assembly Line Systems
T. Yamada; M. Matsui
2000, Proceeding of Pacific Congress on Manufacturing (PCM 2000), 2, 2878-2883

新世代経営環境における設備管理の戦略的研究課題（座談会）
玉木 欽也; 山本 久志; 渡辺 一衛
日本設備管理学会, 2000, 日本設備管理学会誌, 12, 1・2, 3-13, Japanese, 0915-5023, 40004841714, AN10544501

A Pair-wise Agent Modeling in Distributed Maunfacturing Systems
M. Matsui; S. Aita; S. Y. Nof
2000, Proceeding of Pacific Congress on Manufacturing (PCM 2000), 2, 2680-2689

日本的生産方式の待ち行列的考察と２段階設計
1999, 「情報通信ネットワークの新しい性能評価法に関する総合的研究」シンポジウム報文集，静岡, 227-233

コンピュータ統合事業アーキテクチャーの多基準に基づく評価に関する研究
1999, 平成8～10年度文部省科学研究費補助金 国際学術研究研究成果報告書

制約条件の理論(TOC)問題の一般化とその定式化――マネジメント・ゲーム理論の観点から
1999, COM・SCM・スケジューリング研究部会（日本OR・経工学会合同）

制約条件の理論(TOC)問題の一般化とその定式化――マネジメント・ゲーム理論の観点から
1999, COM・SCM・スケジューリング研究部会（日本OR・経工学会合同）

PDCA対CAPDサイクルの考察―マネジメント・サイクルのモデリングに関する研究（第３報）
1999, 日本経営工学会春季大会予稿集, 13-14

制約条件の理論（TOC）問題の一般化とその定式化―マネジメント・ゲームのモデリングに関する研究（第３報）
1999, 日本経営工学会春季大会予稿集, 115-116

個別生産システムのリードタイムと２段階設計
1999, 日本経営工学会春季大会予稿集, 175-176

最適設計のための性能評価問題の考察―組立ラインシステム（ALS）の２段階設計法（第２報）
1999, 日本経営工学会春季大会予稿集, 233-234

情報サービス産業における事業所立地と交通機関の関係について
1999, 日本経営工学会春季大会予稿集, 151-152

マネジメント問題と構造化―確率的マネジメントと設計序論（第１報）
1999, 日本経営工学会秋季研究大会予稿集, 43-44

一般マネジメント問題と確率的設計-確率的マネジメントと設計序論（第２報）
松井正之
1999, 日本経営工学会秋季研究大会予稿集, 62-63, 10011542733

A Management Game Model: Economic Traffic, Leadtime and Pricing Setting
M. Matsui
1999, Proceeding of 15th International Conference on Production Research, 1, 1873-1876, 10010571878

A Management Cycle Model: Type of（t, k ; T）-Switching Policy
M. Matsui; T. Yamaguchi
1999, Proceeding of 2nd Asia-Pacific Conference on Industrial Engineering and Management Systems, 381-384

A 2-Stage Design Problem of Assembly Line Systems with Stoppers
T. Yamada; M. Matsui
1999, Proceeding of 2nd Asia-Pacific Conference on Industrial Engineering and Management Systems, 385-388

Optimal Control of a Job-Shop Production System of Semi-Dynamic Type
M. Matsui; K. Kaneda
1999, Proceeding of 2nd Asia-Pacific Conference on Industrial Engineering and Management Systems, 501-504

The Leadtime of a Job-Shop Production System and Its 2-Stage Design
M. Matsui; Y. Nakada; K. Kaneda
1999, Proceeding of 2nd Asia-Pacific Conference on Industrial Engineering and Management Systems, 51, 505-508, 10010571896

An Investigation of Correlation between Office Location of Information Service Industry and Transportation in Japan
A. Suzuki; M. Matsui
1999, Proceeding of 2nd Asia-Pacific Conference on Industrial Engineering and Management Systems, 569-572

ファシリティ・レイアウトにおける多基準評価に関する一考察
鈴木 淳; 松井 正之
電気通信大学, 1999, 電気通信大学紀要, 12, 1, 25-28, Japanese, 0915-0935, 40004738001, AN10016842

単純フレキシブル組立システムの性能評価と２段階設計
1998, 「情報通信ネットワークの新しい性能評価法に関する総合的研究」シンポジウム報告集，京都, 247-253

時点型個別生産システムの待ち行列解析と最適制御について
1998, 日本OR学会待ち行列研究部会，東工大

An Adam-Eve-like Genetic Algorithm and its Application to a Simpe Flexible Assembly System
1998, 情報処理学会研究報告, 1-6

単純マネジメントゲームモデル：生産待ち行列モデルの経済的トラフィックとバッファ設計について
1998, 日本OR学会待ち行列研究部会，東工大

Queueing Analysis and Optimal Control of a Job-Shop Production System of Dynamic Type
KANBARA Kazuhiro; TAMAKI Mitsushi; MATSUI Masayuki
Suppose that a job-shop production system consist of a sales center with order-selection and a production center with switch-over. Job orders have variable estimated prices and arrive frequently at irregular or random intervals under a changeable production capacity. The macro-level problem considered is summarized as follows. Accepting all orders is not always the best option due to changeable capacity considerations. A manager of job shops is faced with the problem of selecting and processing the orders according to some decision rule, and that of increasing the idle (opportunity) cost of a job shop. We will here decide the structure of the best decision rule under a dynamic job-shop production system. This paper discusses a typical dynamic job-shop model, in the case where fixed switching costs are assumed when two processing types are switched between each other. Four control variables are introduced : two selection criteria (c_1,c_2) and two control levels (i_1,i_2). First, a stochastic model is proposed to derive the two sub-objective functions : the mean accepted price and mean operating cost of the long-run average. Next, by numerical considerations, a cooperative vs.non-cooperative problem of sales and production centers and a periodic vs.dynamic model are discussed. Finally, a revised version of dynamic job-shop production is proposed, and the non-monotonicity of selection criteria (c^*_1,c^*_2) is pointed out., Japan Industrial Management Association, 1998, Journal of Japan Industrial Management Association, 49, 5, 327-337, Japanese, 1342-2618, 110003945604, AN10561806

単純マネジメントゲームモデル：生産待ち行列モデルの経済的トラフィックとバッファ設計について
1998, 日本OR学会待ち行列研究部会，東工大

マネジメント・ゲームのモデリングに関する研究
松井正之
1998, 日本経営工学会春季大会予稿集, 93-94, 10010868522, AN00350950

日本的生産理論の限界に関するより一層の考察－単一段階見込生産システムにおけるプッシュ対プル方式の考察（第４報）
1998, 日本経営工学会春季大会予稿集, 223-224

組立ラインシステム（ALS）の２段階設計法
1998, 日本経営工学会春季大会予稿集, 211-212

遺伝的アルゴリズムを用いた多階層設備配置問題の解法に関する研究
1998, 日本経営工学会春季大会予稿集, 39

経済的需給，リードタイム，プライシング－マネジメント・ゲームのモデリングに関する研究（第２報）
1998, 日本経営工学会秋季研究大会予稿集, 70-71

生産・在庫モデルの切換方策－マネジメント・サイクルのモデリングに関する研究（第２報）
1998, 日本経営工学会秋季研究大会予稿集, 203-204

准時点型個別生産システムの最適制御
1998, 日本経営工学会秋季研究大会予稿集, 195-196

ストッパーのある組立ラインシステム（ALS）の２段階設計
1998, 日本経営工学会秋季研究大会予稿集, 201-202

How to evaluate Computer Integrated Enterprise：A Procedural Framework
A. Suzuki; K. Kattoh; L. Vlacic; K. Yura; M. Matsui; Y. Ogiwara
1998, Proceeding of Pacific Conference on Manufacturing (PCM 1998), 1, 1758-1764

Optimal Design of a Simple Flexible Assembly System by Adam-Eve-like Genetic Algorithm
S. A. Feyzbakhsh; M. Matsui
1998, Proceeding of 2nd International Symposium on Intelligent Manufacturing System (IMS'98), 2, 2555-2564

Multicriteria based Evaluation Models for Facility Layout Planning
A. Suzuki; M. Matsui
1998, Proceeding of the First Korea―Japan Joint Conference on Industrial Engineering and Management, 94-97

An Adam-Eve-like Genetic Algorithm and its Application to a Simpe Flexible Assembly System
1998, Society of Information Processing, 98-MP5-18, 1-6

Stochastic Management and Design of Manufacturing Systems― A Framework
1997, COMのための生産計画・スケジューリング研究部会（日本OR・経工学会合同）

生産システムの確率的マネジメントと設計：単純なゲームモデルとサイクルモデル
1997, 日本経営工学会生産スケジュール研究部会（名工大）

Stochastic Management and Design of Manufacturing Systems-A Framework
MATSUI M.
1997, COMのための生産計画・スケジューリング研究部会（日本OR・経工学会合同）, 10010869149

生産システムの確率的マネジメントと設計：単純なゲームモデルとサイクルモデル
1997, 日本経営工学会生産スケジュール研究部会（名工大）

日本的生産理論の限界に関する一考察――単一段階見込生産システムにおけるプッシュ対プル方式の考察（第３報）
1997, 日本経営工学会春季大会予稿集, 51-52

組立ラインシステムの2段階設計法と研究課題について
1997, 第32回SSOR予稿集, 126-131

企業におけるシステム統合計画案の評価フレームワーク
1997, 経営情報学会・秋季全国研究発表大会, 124-127

マネジメント・サイクルのモデリングに関する研究
1997, 日本経営工学会秋季研究大会予稿集, 124-125

配置可能なエッジを用いた座標型設備レイアウトへのアプローチ
1997, 日本経営工学会秋季研究大会予稿集, 228-229

Flexible Manufacturing Systems with Finite Local Buffers: Fixed vs. Dynamic Routing
S. Uehara; M. Matsui
1997, Proceeding of 14th International Conference on Production Research, 2, 2976-2979

A Coordination Consideration of Manufacturing Systems: Job Shop Case
M. Matsui; J. A. Ceroni; S. Y. Nof
1997, Proceeding of 14th International Conference on Production Research, 1, 1834-1837

Multicriteria-Based Evaluation of CIE/CIM Systems by using DEA
A. Suzuki; L. Vlacic; K. Yura; M. Matsui; Y. Ogiwara
1997, Conference Program of the 4th Conference of the Association of Asian-Pacific Operational Research Societies, within IFORS(APORS'97), HB7.4

Using the Analytic Hierarchy Process in Computer Integrated Manufacturing
Y. Nishibori; L. Vlacic; M. Matsui
1997, Preprints of the 1st IFAC-Workshop on Manufacturing Systems: Manufacturing Modeling, Management and Control (MIM'97), 267-272

Evaluation of Business and Manufacturing Process Alternatives by the Analytic Hierarchy Process
Y. Nishibori; L. Vlacic; K. Yura; A. Suzuki; M. Matsui
1997, Proceeding of the 2nd Asian Control Conference, 1, 69-72

注文と要求に固定タイムラグのある予測を考慮したプル方式の場合――単一段階見込生産システムにおけるプッシュ対プル方式の考察（第２報）
1996, 日本経営工学会春季大会予稿集, 97-98

複数階の建物における設備配置問題のためのメタGAによるGAパラメータ調整について
1996, 日本経営工学会春季大会予稿集, 105-106

生産強度を考慮した製鉄所の容量拡張と立地問題のＧＡ・ＳＡ解法について
1996, 日本経営工学会春季大会予稿集, 103-104

ソフトウエア開発管理の現状と今後の研究課題
1996, 日本経営工学会秋季研究大会予稿集, 137-138

CIEの評価法に関する一考察
1996, 日本経営工学会秋季研究大会予稿集, 143-144

多列型設備配置問題のための計算方法について
1996, 日本経営工学会秋季研究大会予稿集, 208-209

Optimal Design of a Generalized Conveyor-Serviced Production Station: Fixed and Removal Item Cases
A. Feyzbakhsh; M. Matsui; K. Itai
1996, Proceeding of the 6th IFIP TC5/WG5.7 International Conference on Advances in Production Management Systems―APM’96, 209-214

Determination of the Floor for Siting of Each Equipment Unit of a Multipurpose Batch Plant with MILP and GA
A. Suzuki; M. Matsui
1996, Proceeding of mini-Symposium on Genetic Algorithms and Engineering Design, 206-215

有限局所容量をもつフレキシブル生産システムの性能評価の考察：固定対動的ルーチング
1995, ＜情報通信ネットワークに関する性能評価モデルの総合的研究＞シンポジウム報文集（千葉）, 280-291

個別受注生産システムの最適２レベル設計について
1995, COMのための生産計画・スケジューリング研究部会（日本ＯＲ・経工学会合同）

個別受注生産システムの最適２レベル設計について
1995, COMのための生産計画・スケジューリング研究部会（日本ＯＲ・経工学会合同）

単一段階見込生産システムにおけるプッシュ対プル方式の考察
1995, 日本経営工学会春季大会予稿集, 223-224

Optimal Design of a Generalized Conveyor-Serviced Production Station: Fixed Item Case
1995, Prprints of Japan Industrial Management Association, Spring, 90-91

山積型個別受注生産システムの２レベル設計：協力型
1995, 日本経営工学会春季大会予稿集, 134-135

Optimal Design of a Genaralized Conveyor-Serviced Production Station: Removal Item Case
1995, Preprints of Japan Industrial Management Association, Fall, 125-126

動的ルーチングを用いたフレキシブル生産システムの性能評価とその最適設計
1995, 日本経営工学会秋季研究大会予稿集, 152-153

山積型個別受注生産システムの２レベル設計：非協力型
1995, 日本経営工学会秋季研究大会予稿集, 178-179

複数階の建物における各階の設備配置問題のための遺伝的アルゴリズムを用いた計算手順について
1995, 日本経営工学会秋季研究大会予稿集, 268-269

Optimal Design of a Generalized Conveyor-Serviced Production Station: Fixed Item Case
1995, Prprints of Japan Industrial Management Association, Spring, 90-91

Optimal Design of a Genaralized Conveyor-Serviced Production Station: Removal Item Case
1995, Preprints of Japan Industrial Management Association, Fall, 125-126

生産待ち行列システムの最適設計問題
松井正之
1994, ＜情報通信ネットワークに関する性能評価モデルの総合的研究＞シンポジウム報文集(箱根）, 77-85, 80008769777

固定切換費用のもとでのジョブ・ショップ制御方策について
1994, 日本ＯＲ学会待ち行列研究部会,東工大

納期、歩留り、操業時間を考慮したバッチ生産スケジューリング問題における遺伝的アルゴリズムを用いた計算手順について
1994, 第２回生産スケジューリング・シンポジウム報文集, 東京, 145-148

固定切換費用のもとでのジョブ・ショップ制御方策について
1994, 日本ＯＲ学会待ち行列研究部会,東工大

遺伝的アルゴリズムを用いた複数階の建物への各設備の設置階決定法
1994, 日本経営工学会春季大会予稿集, 146-147

固定切換費用のもとでのジョブ・ショップ制御方策：時点型の場合
1994, 日本経営工学会春季大会予稿集, 182-183

アニ―リング法によるフレキシブル生産システムの最適設計
1994, 日本経営工学会春季大会予稿集, 220-221

溢れのある待ち行列システムの最適化：直列型
1994, 日本オペレーションズ・リサーチ学会春季研究発表会アブストラクト集, 23-24

Batching Policy in Kanban Systems について
松井正之
1994, 日本オペレーションズ・リサーチ学会春季研究発表会アブストラクト集, 159-160, 10010869330

遺伝的アルゴリズムを用いた複数階の建物における各階の設備配置決定法
1994, 日本経営工学会秋季研究大会予稿集, 93-94

固定切換費用のもとでのジョブ・ショップ制御方策：山積型対時点型
1994, 日本経営工学会秋季研究大会予稿集, 213-214

有限局所容量をもつフレキシブル生産システムの最適設計
1994, 日本経営工学会秋季研究大会予稿集, 229-230

Optimal Economic Design of Production and Queueing Systems
M. Matsui
1994, Abstracts of the 3rd Conference of the Association of Asian-Pacific Operational Research within IFORS, 77, 266-266, 10010571886

The Performance Evaluation of Flexible Manufacturing System with Finite Local Buffers and its Design Problem
S. Uehara; M. Matsui
This paper evaluates the performance of Flexible Manufacturing Systems (FMS) with finite local buffers by using the theory of closed queueing networks, and discusses the optimal design problem of maximizing its system throughput under a few facility costs. First, the behavior of the system throughput is considered, and it is found that it has the maximum and its value is greater than the case of infinite local buffers. Next, a design problem of system configuration is formulated, and an optimization algorithm using implicit enumeration method is proposed. Finally, a numerical example is given., Japan Industrial Management Association, 1994, Abstracts of the 3rd Conference of the Association of Asian-Pacific Operational Research within IFORS, 45, 5, 267-471, Japanese, 0386-4812, 110003936526, AN00187973

A Relationship of Average Criteria for Queueing Systems with Lost Units
MATSUI M.
1993, Proceedings of Symposium on Performance Models for Information Communication Networks, 371-378, 10010869221

ジョブ・ショップ制御方策に関する一研究
1993, ＜情報・通信ネットワークに関する性能評価モデルの総合的研究＞シンポジウム報文集（沼津）, 25-36

有限局所容量をもつフレキシブル生産システム設計のための一考察
1993, 日本経営工学会春季大会予稿集, 206-207

有限局所容量を持つフレキシブル生産システムの性能評価と最適設計について
1993, CIM環境下における生産計画・スケジューリング研究部会（日本ＯＲ・経工学会合同）

有限局所容量を持つフレキシブル生産システムの性能評価と最適設計について
1993, CIM環境下における生産計画・スケジューリング研究部会（日本ＯＲ・経工学会合同）

固定切換費用のもとでのジョブ・ショップ制御方策：山積型の場合
1993, 日本経営工学会春季大会予稿集, 208-209

一般化コンベヤ生産ステーションの作業時間分布
1993, 日本経営工学会春季大会予稿集, 276-277

等間隔到着をもつコンベヤ生産ステーションの待ち行列解析（２）
板井健治; 松井 正之
公益社団法人日本オペレーションズ・リサーチ学会, 1993, 日本オペレーションズ・リサーチ学会秋季研究発表会アブストラクト集, 112-113, Japanese, 110003477862, AN00351192

整数計画法による選好基準と垂直方向の物流を考慮した複数階の設備配置方法
1993, 日本経営工学会秋季研究大会予稿集, 84-85

選択基準の性質などについて――固定切換費用のもとでのジョブ・ショップ制御方策：山積型の場合(第２報）
1993, 日本経営工学会秋季研究大会予稿集, 170-171

一般化コンベヤ生産ステーションの最適バッファ設計
1993, 日本経営工学会秋季研究大会予稿集, 227-228

一般化コンベヤ生産ステーションへの最適到着スケジュール
松井正之
1993, 日本経営工学会秋季研究大会予稿集, 229-230, 10024068103

A Relationship of Average Criteria for Queueing Systems with Lost Units
1993, Symposium on Performance Models for Information Communication Networks, Numazu, 371-378

ある保全問題に関する一研究
1991, 日本経営工学会春季大会予稿集, 131-132

個別生産システムの待ち行列制御に関する一研究
1991, 日本経営工学会春季大会予稿集, 228-229

劣化の回復がある設備保全問題の経済性について――ある保全問題に関する一研究（第２報）
1991, 日本経営工学会秋季研究大会予稿集, 247-248

JOB-SHOP CONTROL - A JOINT CONSIDERATION OF ORDER-SELECTION AND SWITCH-OVER
G YANG; M MATSUI
TAYLOR & FRANCIS LTD, 1991, Proceeding of 11th International Conference on Production Research, 1119-1122, English, WOS:A1991BW17G00032

静的対逐次受注選択・能力切換方策
1988, 日本経営工学会春季大会予稿集, 61-62

A Mathematical Programming Approach to Designing Conveyor-Serviced Production Systems
M. Matsui, H. Suzuki
1988, Abstracts of the 13th International Symposium on Mathematical Programming, 183

On a Joint Policy of Order-Selection and Switch-Over
MATSUI M.
1988, Journal of Japan Industrial Management Association, 39, 2, 83-87, 10010571885

受注選択・能力切換え方策のゲーム論的考察
1987, 日本経営工学会秋季研究発表会予稿集, 149-150

受注残を制御するための受注選択・能力切換方策
1987, 日本経営工学会春季大会予稿集, 149-150

個別受注生産型待ち行列について
1986, 日本ＯＲ学会待ち行列研究部会,東工大

個別受注生産型待ち行列について
1986, 日本ＯＲ学会待ち行列研究部会,東工大

コンベヤ生産システム問題と信頼度維持
1983, 日本ＯＲ学会ＲＭ研究部会,東工大

コンベヤ生産システム問題と信頼度維持
1983, 日本ＯＲ学会ＲＭ研究部会,東工大

Optimal Order―Selection Policies for Job-Shop Production System
M. Matsui
1983, Proceeding of 7th International Conference on Production Research, 1, 1299-1305

コンベヤに関連した待ち行列ネットワーク問題
1982, 日本ＯＲ学会ＣＱ研究部会,東工大

コンベヤに関連した待ち行列ネットワーク問題
1982, 日本ＯＲ学会ＣＱ研究部会,東工大

個別生産システムにおける最適受注選択方策
1982, 日本経営工学会春季研究発表会予稿集, 43-44

Conveyor-serviced Production System (II) : 2-Level Mathematical Formulation and Application
MATSUI M.
1982, Preliminary Report of the Operations Research Society of Japan, 92-93, 10026459781

コンベヤ生産ステーションの一般化モデルと設計問題
1981, 日本経営工学会秋季研究発表会予稿集, 127-128

Job-Shop Model: A M/(G,G)/1(N) Production System with Order Selection
M. Matsui
1981, Proceeding of 6th International Conference on Production Research, 1, 509-513

受注選択のあるM/G/1(N)型生産システム
1980, 日本経営工学会秋季研究発表会予稿集, 130-131

コンベヤ生産ステーションの待ち行列理論による解析
1977, 日本経営工学会春季研究発表会予稿集, 2-9

複数コンベヤ生産ステーションからなるフローラインの生産率
1977, 日本オペレーションず・リサーチ学会秋季研究発表会アブストラクト集, 104-107

SdSRPをもつコンベヤ生産ステーションの出力分布――ある作業方策をもつコンベヤ生産ステーションでの作業サイクル時間分布（２）
1976, 日本経営工学会春季研究発表会予稿集, 239-240

Belt Conveyor に関連する待ち行列について（２）
1976, 日本オペレーションズ・リサーチ学会秋季研究発表会アブストラクト集, 37-38

コンベヤ生産ステーションにおける作業方策の比較検討
1976, 日本経営工学会春季研究発表会予稿集, 124-125

製造工程における作業集団特性の研究（第３報）
1975, 日本経営工学会春季研究発表会予稿集, 306-310

製造工程における作業集団特性の研究(第４報）
1975, 日本経営工学会春季研究発表会予稿集, 311-315

製造工程における作業集団特性の研究(第５報）
1975, 日本経営工学会春季研究発表会予稿集, 316-320

複合コンベヤ生産ステーションに関する一研究
1975, 日本経営工学会春季研究発表会予稿集, 333-336

等間隔到着をもつコンベヤ生産ステーションの待ち行列解析（１）
1975, 日本オペレーションズ・リサーチ学会春季研究発表会アブストラクト集, 31-32

第一線作業集団の編成に関する基礎的資料――集団編成項目の平均的性質
1975, 経営工学（広島大学工学部紀要）, 23, 1, 143-186

あるコンベヤ生産ステーションの待ち行列的解析――Fixed range policy の場合
1974, 日本オペレーションズ・リサーチ学会春季研究発表会アブストラクト集, 99-100

ある作業方策をもつコンベヤ生産ステーションでの遅れと在庫に対するマルコフ解析
1974, 日本工業経営学会春季研究発表会予稿集, 29-32

Minimum Delay Policy for Conveyor-Serviced Production Station
1974, 日本オペレーションズ・リサーチ学会春季研究発表会アブストラクト集, 117-118

ある作業方策をもつコンベヤ生産ステーションでの作業サイクル時間分布
1974, 日本経営工学会秋季研究発表会予稿集, 317-320

製造工程における作業集団特性の研究(第１報）
1974, 日本経営工学会秋季研究発表会予稿集, 69-72

製造工程における作業集団特性の研究(第２報）
1974, 日本経営工学会秋季研究発表会予稿集, 73-80

作業と人的資源に対する計画策定の研究（第１報）
1973, 日本工業経営学会春季研究発表会予稿集, 307

作業と人的資源に対する計画策定――特に仕事と人間行動について
松井正之
1973, 経営工学（広島大学工学部紀要）, 21, 1, 75-84, Japanese, Introduction research institution

System of Conveyors system
Masayuki Matsui
Lead, May 1972, Industrial Engineering (Bulletin), 20, 1, 95-117, Japanese, Invited, Introduction research institution

A Queueing Analysis of Conveyor-Serviced Production Station with General Arrival
1972, 日本オペレーションズ・リサーチ学会春季研究発表会アブストラクト集, 35-36

職務の属性に関する研究
1972, 日本工業経営学会春季研究発表会予稿集, 66-69

職務設計に関する一考察
1972, 日本工業経営学会秋季研究発表会予稿集, 95-98

コンベヤ系の待ち行列による解析（III)
1971, 日本オペレーションズ・リサーチ学会春季研究発表会アブストラクト集, 113-114

Pause-time distribution について
松井正之
1971, 経営工学（広島大学工学部紀要）, 19, 2, 55-66, Japanese, Report research institution

Erlang-distribution のエントロピーに関するノート
松井正之
1971, 経営工学（広島大学工学部紀要）, 19, 2, 67-75, Japanese, Report research institution

A Note on Entropy of Erlang Distribution
1971, The Keiei-Kogaku(Industrial Engineering), 19, 2, 67-75

コンベヤ系の待ち行列による解析（I)
1970, 日本オペレーションズ・リサーチ学会春季研究発表会アブストラクト集, 25-26

情報量分析による組合せ論的職務設計モデルの考察
1969, 日本工業経営学会春季研究発表会予稿集, 185-188

Belt Comveyor に関連する待ち行列について
1969, 日本オペレーションズ・リサーチ学会秋季研究発表会アブストラクト集, 9-10

情報量分析による職務設計への接近（II)
礒谷昭一; 松井正之
1969, 経営工学（広島大学工学部紀要）, 18, 1, 51-76, Japanese, Introduction research institution

ある作業集団の特性に関する一研究――非作業時間分析にみる集団の単調感と波動性
1968, 日本工業経営学会春季研究発表会予稿集, 95-99

非作業時間分析とその特性（第１報）――作業研究における非作業時間の意味と実験による考察
1968, 日本工業経営学会秋季研究発表会予稿集, 101-102

プロジェクト評価のためのエントロピー測度――冗長度（拘束）概念によるバラツキ時間の最適度の決定
1968, 日本工業経営学会秋季研究発表会予稿集, 58-59

作業ペース化の程度の尺度化と最適ペース
1968, 日本人間工学会中四国支部第３回大会発表予稿集, 7-8

情報量分析による職務設計への接近（I)
礒谷昭一; 松井正之
1968, 経営工学（広島大学工学部紀要）, 17, 1, 131-190, Japanese, Introduction research institution

Artifacts versus Nature Body: A Wealth-Additive Scheme of Enterprise, Economics, and Nature Managing
Masayuki Matsui
Matsui, Masayuki, Springer, 31 Dec. 2023, 9789819976980

Theory, Formulation and Realization of Artifacts Science: 3M&I-Body System
MATSUI Masayuki
Springer Nature, 2019

Fundamentals and Principles of Artifacts Science: 3M&I-Body System
松井 正之
Single work, Springer-Verlag, 2016

経営工学の事典
日本経営工学会編
朝倉書店, 2014

Manufacturing and Service Enterprise with Risks II: The Physics and Economics of Management
MATSUI Masayuki
Single work, SpringerVerlag, 2014

Progress in Economics Research, Vol.25
Editor Albert Tavidze, Ch.12 Masayuki Matsui
Contributor, Chapter 12 Economic Demand-Balancing Problem of Multi-Center, Nova Science Publishers, Inc. NY, 2012

Supply Chain Management: Applications and Simulations
Habib, M
Contributor, Chapter 11 by Sun, J. and Matsui, M., INTECH, 2011

Manufacturing Engineering
Savarese, A. B; titor
Contributor, Chapter 3: Conveyor-like Network and Balancing by Matsui, M., Nova Science Publications, Inc., 2011

需給マネジメント―ポストERP/SCMに向けて
松井正之; 藤川裕晃; 石井信明
朝倉書店, 2009

サプライチェーンハンドブック(翻訳)
朝倉書店, 2008

Manufacturing and Service Enterprise with Risks: A Stochastic Management Approach
Masayuki Matsui
Springer-Verlag, 2008

生産企業のマネジメント―利益最大化と工場理学
松井正之
共立出版, 2005

Management of Manufacturing Enterprise―Profit Maximization and Factory Science
Kyouritsu Shuppan, 2005

サイバーマニュファクチャリング―eラーニングで学ぶモノづくり
トランスアート, 2004

生産管理大辞典（翻訳）
朝倉書店, 2004

Cyber-Manufacturing: e-Learning Lessons
AML-II Project, Aoyama Gaguin University, 2004

Encyclopedia of Production and Manufacturing Management
Asakura Shoten, 2004

VMI―無在庫経営に向けた新ビジネスモデル
湯浅憲治; 松井正之
日刊工業新聞社, 2003

VMI:New Business Model toward Zero-Inventory Management
The Industrial Daily News, 2003

生産管理用語辞典
日本規格協会, 2002

基礎経営システム工学
松井正之; 由良憲二
共立出版, 2002

Glossary of Production and Manufacturing Management Terms
Japanese Standards Association, 2002

Fundamental Industrial and Systems Engineering
Kyouritsu Shuppan, 2002

工程管理ハンドブック
日刊工業新聞社, 1992

Handbook of Production Control
The Industrial Daily News, 1992

IEハンドブック(翻訳)
日本能率協会, 1986

Handbook of Industrial Engineering
Japan Management Association, 1986

新経営組織学
日刊工業新聞社, 1971

New Theory of Organizations
The Industrial Daily News, 1971

産業心理学(翻訳)
評論社, 1970

Industrial Psychology
Hyoronsha, 1970

A Microcosm Study of Natsure vs. Artifacts: Pair Map, Katsui's THeory and Blackholl
MATSUI Masayuki
Invited oral presentation, Japanese, Queueing Divisin, Operations Research Society of Japan, Domestic conference
21 Dec. 2019

INFORMS

特定非営利活動法人 横断型基幹科学技術研究団体連合

日本設備管理学会

国際経営工学技師協会

社団法人日本オペレーションズ・リサーチ学会

社団法人日本経営工学会

The Japan Society of Logistics Systems

Society of Plant Engineers Japan

Scheduling Society of Japan

Institute of Industrial Engineers

Japan Industrial Management Association

流動数管理ロジック(ODICS)に関する研究
2008 - 2010

IT利用における各種業務の円滑化に関する研究
2008 - 2009

流動数管理ロジック(ODICS)の既存在庫管理システムへの組み込みに関する研究
2008 - 2009

車体の低コスト組立工程設計技術の開発
2007 - 2007

サプライチェーン在庫最適化のためのインディケーターによる制御方法の研究
2004 - 2004

企業SCM事例研究
2004

サプライチェーンマネジメントのための流動数ソフトウェアのフィージィビリティー検討
2003 - 2003

SCMにおける在庫シミュレータ
2002 - 2002

生産システム分析アルゴリズムの実用化研究
1998 - 1998

個別生産システムにおける２段階設計法の実用化研究
1998 - 1998

納期制約世界における切換数理とコントロール系に関する研究
松井 正之
科学研究費基盤C, Principal investigator
Apr. 2011 - Mar. 2014

クラウド時代の次世代業績評価システムの研究開発
大場允晶
科学研究費基盤C
Apr. 2011 - Mar. 2014

社会における納期制約のリスクと多期間問題に関する数理的研究
松井 正之
科学研究費基盤C, Principal investigator
Apr. 2008 - Mar. 2011

統合化製品ライフサイクルマネジメントによる事業創造プロセスのモデル化と管理法
玉木欣也
科学研究費基盤B
Apr. 2005 - Mar. 2009

SCM時代の需給マネジメントに関する理論的研究
松井 正之
科学研究費基盤C, Principal investigator
Apr. 2000 - Mar. 2003

コンピュータ統合事業アーキテクチャーの多基準に基づく評価に関する研究
松井 正之
科学研究費国際学術研究, Principal investigator
Apr. 1996 - Mar. 1998

Study on Evaluation of Computer Integrated System
OGIWARA Yotaro; VLACIC Ljubisa b.; SUZUKI Atsushi; MATSUI Masayuki; KEITH J.Morgan
Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research, The University of Electro-Communications, Grant-in-Aid for international Scientific Research, Today, many manufacturing plants must compete world-wide for their business and the plant's directions should be justified before making major advanced technology related investment decisions. Although almost every computerization of an enterprise system is led by both market driven and technology driven success factors, it is of utmost importance to measure to which extent the goals, set prior to the advanced technology investment decision making stage, are achieved after the advanced system has been installed. This project deals with a decision model to be used for Computer Integrated Enterprise/Manufacturing (CIE/CIM) implementation related decision making. This model has already been successfully used, in conjunction with the model solving algorithm, in evaluation of CIE/CIM implementation results across six Japanese enterprises., 06045014
1994 - 1994

Management data, method and management
Patent right, Masayuki Matsui, 特願2019-100202, Date applied: 29 May 2019, 特開2019-212306, Date announced: 12 Dec. 2019, 特許7417974, Date registered: 11 Jan. 2024, Date issued: 19 Jan. 2024, Masayuki Matsui

Progressive body, inventory flow and program
Patent right, Masayuki Matsui, 特願2017-170030, Date applied: 05 Sep. 2017, Masayuki Matsui, 特開2018-45687, Date announced: 22 Mar. 2018, 特許7081782, Date registered: 30 May 2022, Date issued: 07 Jun. 2022, Masayuki Matsui

３次元ダイナミズムの幾何的表示システム、プログラム及び方法
Patent right, 松井 正之, 特願2015-220161, Date applied: 10 Nov. 2015, 特開2017-91195, Date announced: 25 May 2017, 特許6598203, Date issued: 11 Oct. 2019

先見２次ロジック流動数管理システム、プログラム及び方法
Patent right, 松井 正之, 特願2014-231665, Date applied: 14 Nov. 2014, 特開2016-95696, Date announced: 26 May 2016, 特許6534028, Date issued: 07 Jun. 2019

経営支援システム及び経営支援方法
Patent right, 松井 正之, Date applied: 23 Apr. 2014, 特開207229, Date announced: 19 Nov. 2015, 特許6456037, Date issued: 28 Dec. 2018

流動面管理システム
Patent right, 松井 正之, 特願101877, Date applied: 14 May 2013, 特許6132342, Date issued: 28 Apr. 2017

流動数管理システム、方法、及びプログラム
Patent right, 松井正之, 櫻井宏純, 特願37199, Date applied: 16 Feb. 2007, 特許5022729, Date issued: 22 Jun. 2012

流動数管理システム、方法、及びプログラム
Patent right, 松井 正之, 特願174134, Date applied: 14 Jun. 2005, 特許4706018, Date issued: 25 Mar. 2011

マネジメントデータの管理方法
Patent right, 松井正之, 特願2001-297552, Date applied: 27 Sep. 2001, 特開2002-197261, Date announced: 12 Jul. 2002, 特開2002-197261

マネジメントデータの表示方法および生成方法ならびにマネジメント方法
Patent right, 松井正之, 特願2002-150599, 2018-103397, Date applied: 21 May 2001, 特開2002-49449, Date announced: 15 Feb. 2002, 特開2002-49449