Doctor of Engineering, The University of Tokyo

Electronic Messurment

Control Engineering

計測工学

制御工学

Manufacturing technology (mechanical, electrical/electronic, chemical engineering), Measurement engineering

Manufacturing technology (mechanical, electrical/electronic, chemical engineering), Control and systems engineering

01 Apr. 1970 - 25 Mar. 1973
Shinjuku High School

2001 - 2002
理事, 計測自動制御学会, Society

1991
評議員, 日本応用数理学会, Society

Vice Chair of Information and System Division, Institute of Systems,Control, and Information Engineers, Society

Oct. 2017
Contribution of Information Promotion.
Japan
Ministry of Economics, Trade, and Industry
Others, Japan

Mar. 2016
計測自動制御学会制御部門
モデル予測制御を用いた半導体搬送スケジューリングの高速化
制御部門大会技術賞, 中村亮介;澤田賢治;新誠一;熊谷賢治;米田尚人

Dec. 2015
FA財団
状態空間表現による自律無人搬送車のタスク割当と経路計画の同時最適化
論文賞, 中村亮介;澤田賢治;新誠一;熊谷賢治;米田尚人
Publisher, Japan

Mar. 2014
情報セキュリティ大学院大学
情報セキュリティ文化賞
Publisher

May 2013
一般社団法人電気学会
優秀技術活動賞技術報告賞受賞

Oct. 2006
Society of Instrument and Control Engeers
technical Award drom Society of Instrument and Control Engineers

Aug. 2003
Fellow of Society of Instrument and Control Engineers

Jul. 1998
Paper Award from Society of Instrument and Control Engineers

Aug. 1993
Paper Award from Society of Instrument and Control Engineers

Jul. 1992
Paper Award and Takeda Prize from Society of Instrument and Control Engineers

Jul. 1991
Paper Award from Society of Instrument and Control Engineers

Simultaneous Optimization of Dispatching and Routing for OHT Systems via Hybrid System Modeling
Ryosuke Nakamura; Kenji Sawada; Seiichi Shin; Kenji Kumagai; Hisato Yoneda
Proc. IEEE IECON 2014, 4414-4418, 12 Nov. 2014, Peer-reviwed
International conference proceedings, English

Multistep Scheduling Algorithm for Parallel and Distributed Processing with Communication Costs
Hitoshi Yamazaki; Katumi Konishi; Seiichi Shin; Kenji Sawada
Proc. IEEE IECON 2014, 4480-4485, 12 Nov. 2014, Peer-reviwed
International conference proceedings, English

Optimal Scheduling of Automatic Guided Vehicle System via State Space Realization
Kenji Sawada; Seiichi Shin; Kenji Kumagai; Hisato Yoneda
Int. J. of Automation Technology, 7, 5, 572-580, 2013, Peer-reviwed
Scientific journal, English

Activities for Control System Security in Japan
Seiichi Shin
Poc. SICE Annual Conference 2012, 667-669, 21 Aug. 2012, Peer-reviwed, Invited
International conference proceedings, English

SICE International Standardization Activities for future Low-Carbon + Smart Society
Seiichi Shin; Hisashi Sasajima
Poc. SICE Annual Conference 2012, 670-673, 21 Aug. 2012, Peer-reviwed, Invited
International conference proceedings, English

SICE International Standardization Activities for future Low-Carbon + Smart Society
Seiichi Shin; Hisashi Sasajima
Poc. SICE Annual Conference 2012, 670-673, Aug. 2012, Peer-reviwed
International conference proceedings, English

Activities for Control System Security in Japan
Seiichi Shin
2012 PROCEEDINGS OF SICE ANNUAL CONFERENCE (SICE), SOC INSTRUMENT CONTROL ENGINEERS JAPAN, 667-669, 2012, Peer-reviwed, This paper presents an activity related to Control System Security. The control system works every place in the society, including power source, factory, building, home, and so on. The controllers are connected to Internet through an engineering tool on a general O/S, for example Windows. Therefore, vulnerability of the general O/S and the tool may become that of controller. STUXNET attacked this security hole in 2010. Security Task Force is made by METI in 2011. And Control System Security Centre established in 2012 succeeds the work of the TF.
International conference proceedings, English

Modeling and calibration of automatic guided vehcle
Kenji Sawada; Kosuke Tanaka; Seiichi Shin; Kenji Kumagai; Hisato Yoneda
Tr. SICE,, 47, 9, 412-419, Sep. 2011, Peer-reviwed
Scientific journal, Japanese

Multi Function Printer Controlled by Images
Shota Hamamatsu; Kenji Sawada; Seiichi Shin
Proc. 2010 IRAST International Congress on Computer Applications and Computational Science, 334-337, Dec. 2010, Peer-reviwed
International conference proceedings, English

Dynamic Quantizer Synthesis Based on Inavriant Set Analysis for SISO Systems with Discrete-Valued Input
Kenji Sawada; Seiichi Shin
Tr. ISCIE, 23, 11, 249-256, Nov. 2010, Peer-reviwed
Scientific journal, Japanese

Implementation test model of torque control for Automatic Guided Vehicle
Tatsuya Ikawa; Kenji Sawada; Seiichi Shin
Proc. International Conference on Control, Automation and Systems 2010, 276-179, Oct. 2010, Peer-reviwed
International conference proceedings, English

Hiroki Shioda, Kenji Sawada, and Seiichi Shin
Optimal Task; Schedule of Parallel Processing
Proc. 2010 IRAST International Congress on Computer Applications and Computational Science, 360-363, Oct. 2010, Peer-reviwed
International conference proceedings, English

First Year Contribution to International Standardization Activities by SICE
Kazuo Seo; Masaharu Ogawa; Kazuo Kyuma; Seiichi Shin
Proc. SICE 2010, 261-262, Aug. 2010, Peer-reviwed
International conference proceedings, English

Multistep Optimal Scheduling of Automated Guided Vehicles in a Semiconductor Fabrication,
Fumihiko Kato; Seiichi Shin
Proc. SICE 2010, 985-989, Aug. 2010, Peer-reviwed
International conference proceedings, English

Modeling and Calibration of Automatic Guided Vehicle,
Kosuke Tanaka; Kenji Sawada; Seiichi Shin; Kenji Kumagai; Naoto Yoneda
Proc. SICE 2010, 2485-2490, Aug. 2010, Peer-reviwed
International conference proceedings, English

A Design Method for Minimum Cost Path of Flying Probe In-circuit Testers
Yuki Hiratsuka; Fumihiko Kato; Katsumi Konishi; Seiichi Shin
Proc. SICE 2010, 2933-2937, Aug. 2010, Peer-reviwed
International conference proceedings, English

INPUT-OUTPUT RELATION OF LINEAR SYSTEMS BY USING COMPLEX WAVELET PACKET TRANSFORM,
MASAAKI OSAKE; KAZUSHI NAKANO; TETSUYA TABARU; SEIICHI SHIN
International Journal of Wavelets, Multiresolution and Information Processing, 8, 521-535, Aug. 2010
Scientific journal, English

ROAD TYPE ESTIMATION BY WAVELET ANALYSIS OF RUNNING TIRE SOUND
KENSUKE HAYASHI; SEIICHI SHIN
International Journal of Wavelets, Multiresolution and Information Processing, 8, 645-657, Aug. 2010, Peer-reviwed
Scientific journal, English

VISUALIZATION OF MULTI-CAHNNEL VITAL DATA AT ENGINE IDLING BASED ON WAVELET ANALYSIS
Toru Yamamoto; Seiichi Shin
PROCEEDINGS OF THE 2010 INTERNATIONAL CONFERENCE ON WAVELET ANALYSIS AND PATTERN RECOGNITION, IEEE, 381-385, 2010, Peer-reviwed, This paper presents an analysis and a visualization method of vital signals of a passenger, during engine idling. The idling signal is analyzed and suppressed in order to detect a pulse caused by heartbeats and make them visible by wavelet analysis. The measured vital signal is contaminated with an engine idling signal, and it is needed to be separated in a time-frequency band by using wavelet transformation. This paper also proposes a visualization method of 18 channel vital signals with wavelet analysis. An experiment result shows effectiveness of the proposing analysis and method.
International conference proceedings, English

Visualization of multi-dimensional living body information based on wavelet transformation analysis
Toru Yamamoto; Keisuke Hayashi; S. Shin
Proc. ICCAS-SICE 2009, 1865-1869, Aug. 2009, Peer-reviwed
International conference proceedings, English

Collecting Plant Floor Data using Agent Embedded in Controller,
Satoru Hori; Hiromitsu Kato; Hiroshi Fujii; S. Shin
Proc. SICE-ICCAS 2009, 1889-1894, Aug. 2009, Peer-reviwed
International conference proceedings, English

Quantitative Evaluation of Automatic Parts Delivery in “Attentive Workbench” SupportingWorkers in Cell Production
Masao Sugi; Ippei Matsumura; Yusuke Tamura; Makoto Nikaido; Jun Ota; Tamio Arai; Kiyoshi Kotani; Kiyoshi Takamasu; Hiromasa Suzuki; Akio Yamamoto; Yoichi Sato; Seiichi Shin; Fumihiko Kimura
Journal of Robotics and Mechatronics, 21, 1, 135-145, Jan. 2009, Peer-reviwed
Scientific journal, English

Study on active vibration control for high-speed elevators
Naoaki Noguchi; Atsushi Arakawa; Koichi Miyata; Takuya Yoshimura; Seiichi Shin
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, Japan Society of Mechanical Engineers, 75, 754, 1618-1625, 2009, Peer-reviwed, When elevators travel at high speed, horizontal vibrations of the car tend to be set up by guide rail deformations, so the ride quality deteriorates. Therefore, several active suspension systems have been developed to reduce these vibrations. These systems have six actuators that independently activate guide rollers. To reduce costs and installation tasks, it is necessary to develop a system with a minimum number of actuators and a simplified controller. We have developed a new system that has only three actuators. The controller incorporates an H-infinity control design method in order to consider the stability of the system during any change in load. Furthermore, from a practically view point, it is important to reduce the order of the controller so that on-site parameter tuning time can be reduced. We reduced the H-infinity controller to a P controller. We demonstrated that the maximum amplitude of vibrations of a car with control can be reduced to almost half the amplitude of a car without control.
Scientific journal, Japanese

An Implementation of Continuous-Time Deadbeat Control
Kosuke Tanaka; Seiichi Shin
ASCC: 2009 7TH ASIAN CONTROL CONFERENCE, VOLS 1-3, IEEE, 1222-1227, 2009, Peer-reviwed, This paper presents an application of the continuous-time deadbeat control, which is proposed recently based on the finite pole assignment for linear systems with time delay. The control object used here is a carriage, which is build with LEGO MINDSTORMS NXT as a model of crane for LCD manufacturing line. The implementation includes modeling, design, and implementation for a cheap microprocessor for the controller. A comparison with PID control is also shown here.
International conference proceedings, English

Dead Time Measurement of Nuclear Plant Using Wavelet Analysis
Rika MITSUMOTO; Kyoichi OKUSA; Kiyoshi TAMAYAMA; Seiichi SHIN
Proc. International Conference on Control, Automation and System, 2772-2777, Oct. 2008, Peer-reviwed
International conference proceedings, English

Electronically controlled throttle synchronized with intake valves
Yuta Ikeda; Seiichi Shin
3rd KMUTT-UEC Workshop, 39-42, Aug. 2008
International conference proceedings, English

Electronically controlled throttle synchronized with intake valves
Yuta Ikeda; Seiichi Shin
SICE 2008, 1751-1754, Aug. 2008, Peer-reviwed
International conference proceedings, English

Road type estimation by wavelet analysis of running tire sound
Kensuke Hayashi; Seiichi Shin
Proc. IEEE International Conference on Wavelet Analysis and Pattern Recognition, 29-30, Aug. 2008
International conference proceedings, English

Estimating tire condition based on wavelet analysis and frequency modulation
Masaki SUIDO; Tetsuya TABARU; Seiichi SHIN
Proc. International Conference on Control, Automation and System, 2767-2771, Oct. 2007, Peer-reviwed
International conference proceedings, English

Wavelet Packetを用いた非定常雑音下でのシステム同定
Shunichi Akama; Seiichi Shin
電気学会論文誌C, The Institute of Electrical Engineers of Japan, 126, 10, 1249-1254, Oct. 2006, Peer-reviwed, This paper proposes a new method to identify parameters of an SISO DLTI system under non-white non-stationary gaussian stochastic noises, such as time varying colored noises. The method improves the estimation accuracy by prewhitening the noise with a linear time varying filter, which is derived from the wavelet packet analysis.
Scientific journal, Japanese

Self-organization of Decentralized Swarm Agents Based on Modified Particle Swarm Algorithm
Dong Hung Kim; Seiichi Shin
Journal of Intelligent and Robotic Systems, 1573, 0409, 129-149, Aug. 2006, Peer-reviwed
Scientific journal, English

Decentralized Control of Autonomous Swarm Systems Using Artificial Potential Functions: Analytical Design Guidelines
Dong Hun Kim; Hua Wang; Seiichi Shin
Journal of Intelligent and Robotic, 1573, 0409, Jul. 2006, Peer-reviwed
Scientific journal, English

New repulsive potential functions with angle distributions for local path planning
DH Kim; S Shin
ADVANCED ROBOTICS, TAYLOR & FRANCIS LTD, 20, 1, 25-47, 2006, Peer-reviwed, This paper presents new repulsive potential functions (RPFs) for point robot path planning. In this scheme, the RPF for path planning has a different magnitude at each direction of a RPF based on the angle between a goal and an obstacle, unlike a conventional RPF in which the same magnitude at each direction is obtained. In doing so, the RPF attempts to overcome some of the typical problems that may arise with the conventional RPF In particular, this paper presents a set of analyses for designing potential functions to avoid local minima for a number of representative scenarios. Specifically, the following cases are addressed: (i) a non-reachable goal problem (a case in which the potential of the goal is overwhelmed by the potential of an obstacle), (ii) an obstacle collision problem (a case in which the potential of the obstacle is overwhelmed by the potential of the goal) and (iii) a narrow passage problem (a case in which the potential of the goal is overwhelmed by the potential of two obstacles). The proposed RPF scheme eliminates the non-feasible area for the three cases by the help of an angle-varying magnitude between a goal and an obstacle. The example results show that the proposed RPF scheme can effectively construct a path-planning system with the capability of reaching a goal and avoiding obstacles despite possible local minima.
Scientific journal, English

Local path planning using a new artificial potential function composition and its analytical design guidelines
DH Kim; S Shin
ADVANCED ROBOTICS, TAYLOR & FRANCIS LTD, 20, 1, 115-135, 2006, Peer-reviwed, This paper presents a new framework for path planning based on artificial potential functions (APFs). In this scheme, the APFs for path planning have a multiplicative and additive composition between APFs for goal destination and APFs for obstacle avoidance, unlike conventional composition where the APF for obstacle avoidance is added to the APF for goal destination. In particular, this paper presents a set of analytical guidelines for designing potential functions to avoid local minima for a number of representative scenarios based on the proposed framework for path planning. Specifically the following cases are addressed: (i) a non-reachable goal problem (a case in which the potential of the goal is overwhelmed by the potential of an obstacle), (ii) an obstacle collision problem (a case in which the potential of the obstacle is overwhelmed by the potential of the goal) and (iii) a narrow passage problem (a case in which the potential of the goal is overwhelmed by the potential of two obstacles). The example results for each case show that the proposed scheme can effectively construct a path-planning system with the capability of reaching a goal and avoiding obstacles despite possible local minima.
Scientific journal, English

Super Distributed Objects model and autonomous plug and play for context-aware services
Tr. IEEJ, vol. C-124, no. 1, 2004

Dead time measurement of stable system by wavelet under closed loop configuration
Tr. SIC, vol. 40, no. 1, 2004

環境適応サービスを狙いとした超分散オブジェクトモデルと自律プラグアンドプレイ方式
電気学会論文誌, vol. C-124, no. 1, 2004

閉ループ系におけるウェーブレットを用いた安定な系のむだ時間測定
計測自動制御学会論文集, vol. 40, no. 1, 2004

Relation between spectrum density ad wavelet tranform of correlation function
Tr. SICE, vol. 39, no. 5, pp. 425-431, 2003

A structured data-field architecture for on-line transition of information & control systems
Tr. SICE on Industrial Application, vol. 2, no.6, pp. 42-48, 2003

相関関数のウェーブレット変換とスペクトル密度
計測自動制御学会論文集, vol. 39, no. 5, pp. 425-431, 2003

構造化データフィールドアーキテクチュアと情報制御システムの稼動中移行
計測自動制御学会産業論文集, vol. 2, no. 6, pp. 42-48, 2003

Wavelet-based Identification for control of Watertube drum-boilers
Trans. of IEEJ, 122-D, 2, 111, 2002

ウェーブレット解析を用いたドラムボイラ制御設計のための同定
電気学会論文集, 122-D, 2, 111, 2002

時空間型データフィールドアーキテクチュアと情報システムの稼動中拡張
計測自動制御学会産業論文, 1, 2, 9, 2002

Development of robust motor servo control for rear steering actuator based on the two-degree-of-freedom control system
H Kuzuya; S Shin
MECHATRONICS, PERGAMON-ELSEVIER SCIENCE LTD, 10, 1-2, 53-66, Feb. 2000, A rear steering system can improve vehicle stability by actively controlling the rear wheel angles, For designing the rear steering system, environmental conditions, performance deterioration due to aging and component variation as a result of manufacturing tolerance under mass production must be taken into consideration. We have applied two-degree-of-freedom (2DOF) feedback control with feed-forward control for the motor servo control so that the rear steering actuator can track the target rear steering angle accurately and stably. The control system is designed based upon a nominal mathematical model and its variation range.
As a result, the rear steering actuator can be controlled with excellent performance and high reliability. This paper describes the mathematical model construction in the frequency domain and a robust motor servo controller design based on 2DOF feedback control with feed-forward control. (C) 1999 Elsevier Science Ltd. All rights reserved.
Scientific journal, English

Design Method for Distributed map management systems by intelligent data carriers,
Tr. IEE of Japan, 120-c, 5, 641-647, 2000

Emergence of Intelligence
2000

Design method for distributed map management systems by intelligent data carriers
Transaction of IEEJ, 120-C, 5, 641, 2000

Quadratic stability conditions of linear system with Frobenius norm-bounded diagonal perturbations
Tr. of SICE, 36, 8, 720, 2000

自律移動ロボットの動作環境精微のための分散型情報管理システム配置設計
電気学会論文誌, 120-c, 5, 641-647, 2000

知の創発
NTT出版, 2000

自律移動ロボットの動作環境整備のための分散情報システム配置設計
電気学会論文誌, 120-C, 5, 641, 2000

Dead time measurement based on wavelet analysis for correlation data
Tr. SICE, 35, 3, 357-362, 1999

Identification of continuous-time systems with time delay based on wavelet analysis and its application to boiler process
Tr. IEE of Japan, 119-c, 6, 724-733, 1999

Modified balanced truncation of state delay systems
Tr. SICE, 35, 7, 403-408, 1999

Stability of state delay systems based on finite characterization of a Lyapunov functional
SUH Young Soo; SHIN Seiichi
Tr. SICE, The Society of Instrument and Control Engineers, 35, 9, 1170-1175, 1999, First finite characterization of a Lyapunov functional equation for state delay systems is proposed. The finite characterization can be computed using a matrix exponential function, while conventional computation has been relied on numerical approximations. Secondly based on the finite characterization, a stability condition for state delay systems with unknown but bounded constant delay is proposed.
English

Intelligence based on adaptive control
Artificial Life Robotics, 3, 112-116, 1999

Optimal connection design for dynamical modular systems based on LMI
Tr. SICE, 35, 12, 1545-1552, 1999

Helth Monitering
1999

相関データのウェーブレット解析に基づくむだ時間推定
計測自動制御学会論文集, 35, 3, 357-362, 1999

ウェーブレット解析に基づく連続むだ時間系の同定とそのボイラへの応用
電気学会論文誌, 119-c, 6, 724-733, 1999

ヘルスモニタリング
共立出版, 1999

Fault tolerance of autonomous decentralized adaptive control systems
K Ikeda; S Shin
INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE, TAYLOR & FRANCIS LTD, 29, 7, 773-782, Jul. 1998, Modern control theory based on the feedback of all states does not give a design method which tolerates some failure of sensors or actuators. Decentralized control, which stabilizes rite interconnected subsystems by means of local feedback control, is considered to have more failure tolerance than centralized control system do. This paper introduces a mathematical model of a decentralized adaptive control and analyzes the fault tolerance of the decentralized adaptive control system, in which an intelligence is distributed as local adaptive controllers.
Scientific journal, English

Detection of dead time and relative degree using wavelet transformation
Tr. IEE of Japan, 118-c, 4, 606-610, 1998

Adaptive stabilization of minimum phase plants with relative degree n or n+1
Trans. Institute of Systems, Control and Information Engineers, 11, 6, 290-296, 1998

Deadbeat control of MIMO continuous-time systems
Trans. Institute of Systems, Control and Information Engineers, 11, 9, 521-528, 1998

A design method for fault-tolerant multivariable control systems
Tr. SICE, 34, 9, 1184/1190, 1998

Control Theory and CAD Tool
Corona-Sha, 1998

Wavelet変換によるむだ時間と相対次数の同定
飯星
電気学会論文誌, 118-c, 4, 606-610, 1998

相対次数がnまたはn+1の最小位相系の適応的安定化
システム制御情報学会論文誌, 11, 6, 290-296, 1998

多入出力連続時間系のデッドビート制御
NOBUYAMA Eitaku; SHIN Seiichi
システム制御情報学会論文誌, THE INSTITUTE OF SYSTEMS, CONTROL AND INFORMATION ENGINEERS (ISCIE), 11, 9, 521-528, 1998, This paper is concerned with a deadbeat tracking problem of multi-input-multi-output (MIMO) continuous-time systems. The problem is to find a deadbeat controller that achieves both the internal stability and deadbeat tracking. The objective of this paper is to show that even in MIMO continuous-time systems the deadbeat tracking problem has a solution on the assumption of the tracking condition.
Japanese

耐故障性を有する多変数制御系の一設計法
計測自動制御学会論文集, 34, 9, 1184/1190, 1998

制御系設計理論とCADツール
コロナ社, 1998

Autonomoas Controllability of hirachical decentralized Systems
Tr. IEEJ, C-117, 7, 850-855, 1997

Stability condition of state-delayed systems based on stability guranteed discritization.
Tr. SICE, 33, 5, 403-408, 1997

Academic Consideration of Portable Game Machine, "TAMAGOTTI"
Ohmsha, 1997

Structural Analysis of fault-tolerance for homogeneous systems
Tr. SICE, 33, 5, 441-447, 1997

Autonomous controllability of hirarchical decentralized systems
Tr. IEE of Japan, 117-c, 7, 850-855, 1997

たまごっち学術考
オーム社, 1997

階層型分散システムにおける自律可制御性
電気学会論文誌, 117-c, 7, 850-855, 1997

Basis of Control Theory
Shokodo, 1996

A two-dimensional maximum searching method by a combined global priority strategy with rocal peak estimation
32, 8, 1294-1303, 1996

Terminology on Soft Computing
1996

制御理論の基礎
昭晃堂, 1996

大域的優先探索と局所峰推定の組合わせによる2次元最大値探索法(共著)
WAKASUGI Yoshizumi; YASUDA Gen-ichi; SHIN Seiichi
計測自動制御学会論文集, 計測自動制御学会, 32, 8, 1294-1303, 1996
Japanese

ソフトコンピューティング用語集(共著)
朝倉書店, 1996

MODEL-REFERENCE LEARNING CONTROL FOR NONLINEAR-SYSTEMS
M NARUSHIMA; K ITAMIYA; S SHIN
JOURNAL OF SYSTEMS ENGINEERING, SPRINGER-VERLAG LONDON LTD, 5, 3, 124-132, Aug. 1995, This paper proposes a model reference learning control for nonlinear plants. The nonlinearity is estimated through trials, which start at a same initial condition. The control input is generated on the basis of the estimates, so as to force the output of the plant to follow the output of the prespecified reference model which is driven by an arbitrary bounded command input. Unlike model reference adaptive control, this controller can cope with nonlinearity because the controller estimates optimal values of tunable functions, adding to parameters. Moreover, the command input can be varied through trials since nonlinear functions included in the model reference controller are adjusted through trials, whereas the repetitive learning controller cannot, since it estimates the control input directly. Convergence of the following error is analysed theoretically and is verified by a simple numerical simulation on a one-pivot manipulator.
Scientific journal, English

Autonomous Decentraliged Systems
Asakura, 1995

Hello! PHS
Ohm, 1995

計測制御事典(共著)
丸善, 1995

自律分散システム(共著)
朝倉書店, 1995

ハロー!PHS
オーム社, 1995

AI, Fuzzy and Neural Technologies in Control
Systems, Control and Information, 38, 2, 95-102, 1994

Adaptive Control and Industrial Application
The Transactions of The Institute of Electrical Engineers of Japan., 114-D, 10, 939-942, 1994

制御におけるAI,ファジィ,ニューロ技術のその将来
システム/制御/情報, 38, 2, 95-102, 1994

適応制御と産業応用
新誠一
電気学会論文誌, 114-D, 10, 939-942, 1994

STABLE MODEL-REFERENCE ADAPTIVE-CONTROL FOR PERIODICALLY LTV SYSTEMS BASED ON THE MAXIMAL ERROR EVALUATION
K ITAMIYA; S SHIN; K ANDO
INTERNATIONAL JOURNAL OF CONTROL, TAYLOR & FRANCIS LTD, 58, 1, 51-64, Jul. 1993, This paper presents a model reference adaptive control system (MRACS) which does not depend on the degree of the plant when the plant is the continuous-time periodically linear time varying (LTV) system. A priori information is only the relative degree and the time-varying period. The controller has adjustable scalar functions. The optimal functions of these are estimated directly, synchronizing with the time-varying period of the plant by adaptive laws. The main contribution of this paper is that the computational burden of the adaptive law for the direct function estimation is reduced. It is accomplished with the maximum normalized error evaluation typed adaptive law. The design method and the global stability analysis of the proposed system are shown and a simple numerical simulation result is indicated to verify the viability of the proposed system.
Scientific journal, English

Adaptive Control and Its Relatives
Journal of the Society of Instrumentation and Control Engineers, 32, 12, 975-980, 1993

Nonlinear observer for VLSI Circuits
J. Fac. Eng. , Univ. of Tokyo, A-31,50-51, 1993

適応制御とその周辺
計測と制御, 32, 12, 975-980, 1993

計測用語(共著)
日本規格協会, 1993

最適な制御系設計法と各種制御方式の基礎・理論・応用の実際
アイ・エヌ・ジー, 1993

非線形観測器によるVLSI回路の状態推定
東京大学工学部紀要, A-31,50-51, 1993

Practical hybrid adaptive control taking into consideration computational time
International J. of Control, 54, 2, 1991

相対次数に依存しない連続時間MRACSのロバスト性
計測自動制御学会論文集, 27, 6, 1991

Continuous-time model reference adaptive control for unknown nonlinear system
International J. of Control, 49, 2, 1989

線形時変系に対する連続時間形式モデル規範形学習制御
計測自動制御学会論文集, 25, 1, 1989

Continuous-time model reference adaptive control based on weighting functions
IEEE Tr. on Automatic Control, 32, 5, 1987

入力にむだ時間を含む連続時間形式線形系に対するモデル規範形適応制御系の安定性
計測自動制御学会論文集, 23, 7, 1987

A timing and location transparent data-field architecture and on-line expansion of information & control systems
Tr. SICE on Industrial Application, 1, 2, 9

制御システムのセキュリティ動向
Seiichi Shin
May 2012, ISA-Japan Section NEWSLETTER, 16, 39, 2-4, Japanese, Peer-reviwed, Introduction other

モデルが実現するツール連携
新誠一
Jul. 2010, 計測と制御, 49, 7, 421-425, Japanese, Peer-reviwed, Introduction other

モデルが実現するツール連携
新誠一
Jul. 2010, 計測と制御, 49, 7, 421-425, Japanese, Peer-reviwed, Introduction other

System Architecture of Cooperation in Manufacturing Information
Seiichi Shin
Mar. 2010, Journal of Society of Instrument and Control Engineers, 49, 3, 153-154, Japanese, Peer-reviwed, Introduction other

MOF2008実録記
新誠一; 村上正志
Nov. 2009, IPG, 23, 11, 14, Japanese, Introduction other

検査の時代の始まり
新誠一
Oct. 2009, 検査技術, 14, 10, 44-45, Japanese, Introduction other

ウェーブレット解析の産業応用のあゆみと展望
新誠一; 中野和司
Oct. 2009, 電気学会会誌, 129, 10, 664-667, Japanese, Peer-reviwed, Introduction other

計測制御のための無線通信技術の現状と展望
新誠一
Jul. 2009, 計測と制御, 48, 7, 537-541, Japanese, Peer-reviwed, Introduction other

３回目を迎えたMOF～その意義と新たなフェイズへの挑戦
新誠一
Sep. 2008, 計装, 51, 9, 17-20, Japanese, Introduction other

センシングとテスティング
新誠一
Sep. 2008, IPG, 23, 9, 18, Japanese, Introduction other

MOF2008製造情報連携
新誠一
Aug. 2008, IPG, 23, 8, 9, Japanese, Introduction other

ものづくりと制御とコントローラ
新誠一
Jun. 2008, IPG, 23, 6, 28, Japanese, Introduction other

計測制御と自動車
新誠一
Jun. 2008, M&E, 35, 6, 186-188, Japanese, Introduction other

IT産業・先進産業における技術伝承
新誠一
Apr. 2008, 計測と制御, 47, 4, 270-275, Japanese, Peer-reviwed, Introduction other

標準化技術の連携におけるOPCの役割とシステムイノベーション
新誠一
Mar. 2008, 計装, 51, 4, 17-19, Japanese, Introduction other

未来の車とディスプレイ
新誠一
Mar. 2008, 月刊ディスプレイ, 14, 4, 20-24, Japanese, Introduction other

展示開発ニューテクノロジーの胎動と期待
新誠一
Oct. 2007, 計装, 50, 11, 2-5, English, Introduction other

問題解決のための情報共有を実現したポータル集団
新誠一; 村上正志
Oct. 2007, 計装, 50, 11, 69-71, Japanese, Introduction other

身近な省エネ技術～未来の日本～
新誠一
Oct. 2007, OHM, 94, 11, 69-71, Japanese, Introduction other

エンジニアと資格
Seiichi Shin
May 2007, 計測と制御, 46, 5, 338-342, Japanese, Peer-reviwed, Introduction other

ロボット化する自動車
新誠一
電子情報技術産業協会, May 2007, JEITA Review, 8, 5, 2-7, Japanese, Introduction other, 1346-115X, 40015498671, AA11499852

高度制御・最適化技術の最近の傾向とさらなる進展方向
新誠一
May 2007, 計装, 50, 06, 44-47, Japanese, Introduction other

巻頭言「ＭＯＦ2006」「生産と設備のソリューション展2006」－その役割と製造業革新の潮流
新誠一
Dec. 2006, 計装, 40, 12, 9-11, Japanese, Introduction other

MESXプロジェクトの概観と実証試験の評価
新誠一; 渡部裕二
Dec. 2006, 計装, 40, 12, 49-51, Japanese, Introduction other

ウェーブレットによるむだ時間系の同定とプロセス制御応用
中野和司; 田原鉄也; 新誠一
Dec. 2006, 計測と制御, 45, 12, 1062-1067, Japanese, Peer-reviwed, Introduction other

設備IT化とユビキタス計装～その融合がもたらすもの
新誠一
Oct. 2006, 計装, 40, 10, 17-20, Japanese, Introduction other

ネットワークがもたらすセンシングの新しい価値
新誠一
Aug. 2006, 計測技術, 34, 8, 1-4, Japanese, Introduction other

IoT時代のサイバーセキュリティ
新誠一; 澤田賢治
Scholarly book, Japanese, Joint work, 第1章IoTと制御システムセキュリティの概要, NTS, 21 Nov. 2018, 9784860435394

仮想戦争の終わり
Scholarly book, Japanese, Joint work, 第2章制御システムセキュリティ, KADOKAWA, 25 Dec. 2014, 9784046538932

環境ソリューション2012年版
Japanese, Joint work, スマート技術による環境ソリューション, 日刊工業出版, Sep. 2012

日本のものづくりの未来
Japanese, Joint work, エピローグ「日本のものづくりの未来」, 日本能率協会, Jun. 2012

ITソリューション2012年版
Japanese, Joint work, 21世紀のICTソリューション, 日刊工業出版, Apr. 2012

環境ソリューション2011年版
Japanese, Joint work, 東日本震災で変わる環境ソリューション, 日刊工業出版, Sep. 2011

カーエレクトロニクス・テクノロジー
Japanese, Supervisor, 生産と設計をつなぐMBD, 工業調査会, Feb. 2009

M2Mコンソーシアム
M; M
Japanese, Joint work, 第2章（M2Mの具体事例）第5節（M2Mの新しい流れ），第3章(M2Mの技術要件)第1節(総論), 日刊工業新聞社, Sep. 2008

2008自動車用半導体・センサ技術大全
Japanese, Joint work, カーエレクトロニクスの現状と動向, 工業技術社, Jun. 2008

図解最先端半導体パッケージ技術のすべて
Japanese, Joint work, 第6章1節 ロボット化する自動車, 工業調査会, Sep. 2007

生産現場のソフトウェア
Seiichi Shin
Japanese, Joint work, 島と海－設計，生産とWeb 2.0, ニュースダイジェスト社, May 2006

Front Line of Car Electronics
Seiichi Shin
Japanese, Editor, 工業調査会, Mar. 2006

機械工学便覧デザイン編β6「制御システム」
Japanese Society of Mechanical Engineering
Japanese, Joint work, 丸善, 2006

What are the Standards in Industrial Automation Sector?
Seiichi Shin
Keynote oral presentation, English, ICCAS-SICE 2009, SICE and ICCAS, Fukuoka, Japan, International conference
Aug. 2009

Industrial Application of Wavelet Analysis
S. Shin
Invited oral presentation, English, International Conference on Wavelet Analysis and Pattern Recognition,, IEEE, Hong Kong, China, International conference
Aug. 2008

ユビキタス・センサNWと温度計測
新誠一
Invited oral presentation, Japanese, 第124回温度計測部会講演会「センシングシステムの最近の動向と温度計測技術の進歩」, (社)計測自動制御学会
Nov. 2007

クルマの安全を支える最新計測技術
新誠一
Invited oral presentation, Japanese, 計測展2007TOKYOチュートリアル講演, （社）日本電気計測器工業会
Nov. 2007

最新IT事情
新誠一
Keynote oral presentation, Japanese, 第31回紙パルプ計装技術発表会, 紙パルプ技術協会, Domestic conference
Nov. 2007

戦略計装の提唱
新誠一
Keynote oral presentation, Japanese, 計装制御技術会議特別セッション「戦略計装の提唱」, （社）日本能率協会, Domestic conference
Nov. 2007

Advanced IT Specialist Promotion Program
Haruo Ishikawa; Seiichi Shin
Keynote oral presentation, English, International Forum of University President on Information Communication Technology, International Forum of University President on Information Communication Technology, International conference
Oct. 2007

計測制御と自動車
新誠一
Invited oral presentation, Japanese, (社)計測自動制御学会中部支部主催チュートリアル講演会, （社)計測自動制御学会中部支部
Oct. 2007

Mathematical model used in automotive industry
Seiichi SHIN
Invited oral presentation, English, International Workshop on Applied Mathematics and Computational Science, University of Electro-Communciations
Sep. 2007

カーエレクトロニクスの現状と将来の動向
新誠一
Invited oral presentation, Japanese, 第40回「電子機器及び電子デバイス関連の動向」講演会, （社）電子情報技術産業協会
Aug. 2007

MBD education in UEC
Seiichi Shin
Invited oral presentation, English, 2nd KMUTT-UEC Workshop, KMUTT-UEC, Bangkok, Thailand, International conference
May 2007

A future of car driven by electro
Seiichi Shin
Invited oral presentation, English, SICE-ICASE Joint Conference, SICE-ICASE, Busan, Korea, International conference
Oct. 2006

Trend of process automation and factory automation
Seiichi Shin
Invited oral presentation, English, SICE-ICASE Joint Conference, SICE
Oct. 2006

Institute of Systems,Control, and Information Engineers

日本応用数理学会

計測自動制御学会

電気学会

システム制御情報学会

日本機械学会

米国電気電子学会(Institute of Electrical and Electronics Engineers